A 24-inch back-to-back tubular towel bar mounts through the glass with two clamp bases and puts a full-length bar on the inside and outside of the enclosure at the same time, so one panel does double duty as a drying rack for two showers. It’s a small hardware line item, but on neo-angle shower doors and other tight layouts where towel hooks aren’t an option, it solves a real problem.
3 min read
What Is the 24″ back to back tubular towel bar?
The BM24x24 is a double tubular bar — two parallel tubes, one facing into the shower and one facing out — held by a pair of through-glass clamps that bolt straight into pre-drilled holes in the panel. Because it mounts to the glass itself rather than the wall, it works on fixed panels, swing doors, and neo-angle configurations as long as there’s a clear 24-inch run of glass to drill. One installation gives you a towel bar for the shower and a towel bar for the bathroom, without adding a second bracket to the wall.
Available Finishes
This bar currently ships in one finish.
Chrome
Chrome is the standard finish for IDEAL hardware and reads bright and reflective against clear glass, which is why it’s the most common pick for classic white or marble-tile bathrooms and for homeowners matching existing chrome faucets and shower valves.
Why Hardware Finish Matters
A towel bar is one of the largest visible pieces of metal in the shower, so its finish sets the tone for every other piece of hardware — hinges, clamps, handles — on the door. Mismatched finishes are one of the more common regrets we hear about after a DIY hardware swap, so it’s worth matching the bar to whatever finish is already on the faucet and showerhead before ordering.
Frequently Asked Questions
What’s the downside of a back-to-back towel bar on a frameless shower door?
The main tradeoff is real estate — the bar needs a clear 24-inch stretch of glass away from hinges, clamps, and the door swing, which isn’t always available on a narrow neo-angle panel or a door with a lot of existing hardware. On a project like our pivot and neo-angle install in Dedham, we had to plan the bar placement around the pivot hinges before ordering glass. If your panel is already tight on space, a single-sided bar or a wall-mounted option is usually the better call.
How do you keep the chrome finish looking new?
Chrome holds up well to daily use — a quick wipe with glass cleaner and a microfiber towel after showering keeps water spots from building up on both the bar and the glass around it. If you’re searching for shower door hardware near me because an older bar has pitted or hazed, chrome is one of the easier finishes to keep looking new since it doesn’t show fingerprints the way matte finishes do.
What does it typically cost to upgrade shower door hardware?
A hardware swap alone is inexpensive, but most homeowners add a back-to-back towel bar as part of a full frameless door project, which typically runs $800 to $2,500 depending on size and configuration. Stop by our Danvers showroom to see the finish in person, or request a free in-home measurement through our contact page and we’ll price it out for your exact door.
See the 24″ Back-to-Back Towel Bar in Our Danvers Showroom
The chrome finish looks different in person than it does in photos, especially once it’s catching light against clear glass, so it’s worth a stop at our showroom at 9 Riverside Ave in Danvers before you commit. We work with homeowners throughout Beverly, Salem, Marblehead, Peabody, and Middleton, and most complete frameless door projects with hardware like this run $800 to $2,500.
Call us at (978) 777-9900 or reach out through our contact page to schedule a free in-home measurement and get a quote.
