Beverly, MA is where this stretch of installs started, and it’s usually the first question people ask before we get the tape measure out: what’s this going to cost? From on-site experience at IDEAL, present for every installation the team completes, the answer comes down to glass thickness, the finish on your shower door hardware, enclosure size, and what the tile crew left us to work with. Most jobs across the North Shore fall between $800 and $2,500, and these six from one summer stretch show why.
3 min read
A Sliding Door in Beverly, Riding a Chrome Track
This one’s a straight bypass door — two panels on a chrome track instead of hinges, since the bathroom door swings right into that space. Marble hex tile on the floor meant every cut had to stay dead level under that big window. Jobs like this usually sit mid-range.
A Fixed Panel Over the Tub in Reading
Reading was a straightforward tub-shower combo — one fixed panel, chrome hardware, white subway tile top to bottom. No door swing and no sweep seal to think about later, so this one landed toward the lower end of the range.
A Neo-Angle Corner in Chelmsford, Black Hardware
Chelmsford had an odd corner, so we built a neo-angle enclosure — two angled panels and a hinged door in matte black hardware. The picket tile behind it took extra time to line up, and that custom cut work pushes a job toward the higher end.
Marble and Brushed Brass in Manchester-by-the-Sea
This bathroom is about as far as you can go on finish and still be practical — full marble slab walls, a freestanding tub, brushed brass hardware down to the hinges. Jobs like this run toward the top of the range, and for that much tile work, it tracks.
Tucked Under a Sloped Ceiling in Watertown
Watertown gave us a tight attic bathroom with a sloped ceiling right over the tub, so the panel had to follow that angle instead of running straight across. Older homes like this show up all over the North Shore, and an angled cut usually lands a job a bit higher in the range.
Back in Beverly, Coastal Tile and a Beadboard Ceiling
We closed out the stretch back in Beverly with a tub enclosure under a blue beadboard ceiling and a blue-and-white mosaic floor — the coastal look you see a lot this close to the water. One fixed panel, brushed nickel hardware, and a tiled-in niche kept this one solidly mid-range. Curious what makes this town tick? We’ve written about that too.
Frequently Asked Questions
How do I keep the glass clean without streaks?
Squeegee the glass right after you shower, before water spots set — that habit alone keeps it clear longest. We install IDEAL Crystal Clear Glass on most jobs, which cuts the green tint of regular glass, and a weekly microfiber wipe keeps hard water marks off the caulk line and hardware.
How do I know if my shower door needs adjustment?
If the door’s dragging on the track, not closing flush, or water’s sneaking past the sweep seal, the hinges or rollers have usually shifted — often just from normal house settling. We hear from people searching for a frameless shower door near me over this exact issue, and it’s usually a quick fix, not a replacement.
How much does a frameless shower door cost in the North Shore area?
Most of what we install across Danvers, Beverly, Salem, and Marblehead runs between $800 and $2,500, depending on glass thickness, hardware finish, enclosure size, and how much prep the tile needs underneath. The best way to get an exact number is our free in-home measurement — someone looks at your actual space and gives you a real quote.
Where Our Crew Shows Up Next
We’re in and out of bathrooms all over the North Shore — Danvers, Beverly, Salem, Marblehead, Swampscott, Lynn, Peabody, and Middleton. Want eyes on your own space? Reach out through our contact page.
Ready to see what your bathroom would run? Call us at (978) 777-9900 or send a note through our contact page — our team will get a free in-home measurement on the calendar.
