# Shower Door Seals for 1/4" Glass (6 mm) | CRL Seals | IDEAL Shower Doors

URL: https://idealshowerdoors.com/store/glass/1-4-inch
Description: Replacement shower door seals for 1/4" (6 mm) glass: bottom sweeps, H-jambs, H wipes and magnetic seals. Genuine CRL parts from IDEAL Shower Doors, Danvers, MA. Ships to the lower 48 states.
Seller: IDEAL Shower Doors, Danvers, MA (https://idealshowerdoors.com/store/)

---

# Shower Door Seals for 1/4" Glass

1/4" (6 mm) glass is the thinnest glass used in shower doors. You will find it on framed doors, older enclosures and some sliding doors. It is too light for most frameless swing doors, so if your door has no metal frame around it, measure again: it is more likely 3/8".

Every seal below pressure fits onto 1/4" glass. A seal made for thicker glass will be loose and fall off; one made for thinner glass will not go on.

Other thicknesses: [5/16"](https://idealshowerdoors.com/store/glass/5-16-inch) · [3/8"](https://idealshowerdoors.com/store/glass/3-8-inch) · [1/2"](https://idealshowerdoors.com/store/glass/1-2-inch) · [How to measure](https://idealshowerdoors.com/store/measure) · Tape-on seals that fit any thickness: [bulb & fin seals](https://idealshowerdoors.com/store/c/bulb-fin)

- [Not sure which seal you need? Use our Seal Finder Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds. Start the Seal Finder →](https://idealshowerdoors.com/store/finder)

Prefer to read? [Which seal do I need?](https://idealshowerdoors.com/store/guide/which-seal) matches the leak to the seal.

## [Bottom Sweeps & Drip Rails](https://idealshowerdoors.com/store/c/bottom) (1)

- [CRL P914WS Bottom Wipe with Drip Rail for 1/4" Glass 1/4" glass · 95" $19.95 View](https://idealshowerdoors.com/store/p/p914ws)

## [Straight-Line Seals (180°)](https://idealshowerdoors.com/store/c/inline-180) (4)

- [CRL PCC8L 'Y' Jamb with Soft Leg for 1/4" & 5/16" Glass 1/4", 5/16" glass · 95" $31.48 View](https://idealshowerdoors.com/store/p/pcc8l)
- [CRL P140HJ Clear 'H' Jamb, 180°, for 1/4" Glass 1/4" glass · 95" $14.18 View](https://idealshowerdoors.com/store/p/p140hj)
- [CRL P14WS Dual-Durometer Seal & Wipe for 1/4" Glass 1/4" glass · 95" $11.03 View](https://idealshowerdoors.com/store/p/p14ws)
- [CRL P250HW Multi-Purpose 'H' Wipe for 1/4" Glass 1/4" glass · 95" $13.13 View](https://idealshowerdoors.com/store/p/p250hw)

## [Corner Seals (90° & 135°)](https://idealshowerdoors.com/store/c/corner) (1)

- [CRL P12LJT2 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) 1/4", 5/16", 3/8", 1/2" glass · 95" $18.90 View](https://idealshowerdoors.com/store/p/p12ljt2)

## [Magnetic Seals](https://idealshowerdoors.com/store/c/magnetic) (3)

- [CRL PMA8 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass 1/4", 5/16" glass · 95" $33.58 View](https://idealshowerdoors.com/store/p/pma8)
- [CRL PMB8 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass 1/4", 5/16" glass · 95" $33.58 View](https://idealshowerdoors.com/store/p/pmb8)
- [CRL PMC8 Magnetic Seal, 90°, for 1/4"–5/16" Glass 1/4", 5/16" glass · 95" $33.58 View](https://idealshowerdoors.com/store/p/pmc8)

## [Gaskets](https://idealshowerdoors.com/store/c/gaskets) (4)

- [CRL P281 Clear 1/4" Vinyl Insert for Junior Header Kits 1/4" glass · 95" $14.70 View](https://idealshowerdoors.com/store/p/p281)
- [CRL HV140 Clear Header Vinyl for 1/4" Glass (per foot) 1/4" glass $1.89 /ft 100 ft minimum ($189.00) View](https://idealshowerdoors.com/store/p/hv140)
- [CRL SDV734C Gray Glazing Vinyl for 1/4" Glass, 100' Roll 1/4" glass · 100' $86.08 /roll View](https://idealshowerdoors.com/store/p/sdv734c)
- [CRL SDV732C Gray Glazing Vinyl for 7/32"–1/4" Glass, 100' Roll 1/4" glass · 100' $102.88 /roll View](https://idealshowerdoors.com/store/p/sdv732c)

## 1/4" glass: common questions

**How do I know my shower glass is 1/4"?**

Lay a tape measure across a bare edge of the glass. 1/4" is four 1/16" marks (about 6 mm). If you count six marks it is 3/8"; five marks is 5/16".

**Will a 3/8" seal work on 1/4" glass?**

No. Clip-on seals grip the glass by pressure, so a seal made for thicker glass will slide off. Order the seal made for your exact thickness.

**My framed door has a vinyl sweep in a metal track. Is that a 1/4" seal?**

Not usually. Framed doors use slide-in vinyl sweeps that fit the metal bottom rail, not the glass. Those are in our [Framed Door Sweeps](https://idealshowerdoors.com/store/c/framed) section.