# Frameless Shower Door Seal – Clear 'H' Jamb, 180°, for 1/4" Glass – CRL P140HJ | IDEAL Shower Doors URL: https://idealshowerdoors.com/store/p/p140hj Description: Genuine CRL P140HJ, the original part (not a look-alike): a 95-inch clear 'h' jamb, 180°, for 1/4-inch glass, with a suggested 3/16" gap. Free shipping to the lower 48. Our most popular straight-line seal. All-rigid and nearly invisible. Seller: IDEAL Shower Doors, Danvers, MA (https://idealshowerdoors.com/store/) ## Product facts - Part number: P140HJ (CRL) - Product: Clear 'H' Jamb, 180°, for 1/4" Glass - Price: $14.18 each - Glass thickness: 1/4" - Gap: 3/16" - Length: 95 in. (2413 mm) (cut to fit) - Install method: Pressure fits onto the glass - Availability: in stock - Summary: The CRL P140HJ is a 95-inch clear 'h' jamb, 180°, for 1/4-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear. - Shipping: free on every order; usually ships within 3-7 business days (US only). - CRL fees (passed on at cost, never marked up): $5.00 small-order fee on orders under $50; $6.50 packing fee once per order with fewer than 10 seal lengths in total. A single unit pays $11.50 in fees. Details: https://idealshowerdoors.com/store/policies#fees - Returns: All sales final, no returns or exchanges. https://idealshowerdoors.com/store/policies#final - Buy: https://idealshowerdoors.com/store/p/p140hj ---
![Frameless Shower Door Seal: Clear 'H' Jamb, 180°, for 1/4" Glass – CRL P140HJ profile drawing](https://idealshowerdoors.com/store/img/P140HJ.webp) CRL · Part P140HJ In stock # Clear 'H' Jamb, 180°, for 1/4" Glass Our most popular straight-line seal. All-rigid and nearly invisible. $14.18 + Free shipping **1/4"** Glass thickness **3/16"** Gap **95"** Cut to fit **Pressure fit** No tape needed **Ships free to your door** Free on every order to the lower 48 states and DC. Usually ships in 3–7 business days. ![Plastic Trim Snips for Cutting Seals, Black – CRL PTS89 product photo](https://idealshowerdoors.com/store/img/PTS89.webp) Cut it to length [**CRL PTS89 Plastic Trim Snips for Cutting Seals**](https://idealshowerdoors.com/store/p/pts89) Clean, straight or angled cuts on vinyl and plastic seals. $88.49 **Free shipping** On every order **All sales final** Check your [glass thickness](https://idealshowerdoors.com/store/measure). **Not sure it fits?** [Try the Seal Finder](https://idealshowerdoors.com/store/finder) ## About this seal The CRL P140HJ is a 95-inch clear 'h' jamb, 180°, for 1/4-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear. Pressure fits onto the edge of the fixed panel with the lip on the latch side, or onto the door with the lip on the hinge side. The lip overlaps the gap so water can't get through where the door closes in a straight line. Entirely rigid polycarbonate for a clean, clear look. For 1/4" glass. 95" length, cut to fit. - Most popular straight-line (180°) seal - Clear, low-profile look - Suggested gap: 3/16" - 95" length, cut to fit ## Fit & specs | Spec | Value | | --- | --- | | Glass thickness | 1/4" | | Gap | 3/16" | | Installs by | Pressure fits onto the glass | | Used for | Door to fixed glass panel (straight line)
Latch (strike) side
Hinge or pivot side | | Length | 95 in. (2413 mm) | | Material | Polycarbonate | | Pre-Applied Tape | No | ## Common questions **What glass thickness does the CRL P140HJ fit?** The CRL P140HJ fits 1/4" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on. **What gap does the P140HJ seal?** The suggested gap is 3/16". Measure with the door closed. **How do I install the CRL P140HJ?** It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first. **How do I cut the CRL P140HJ to length?** Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the [CRL PTS89](https://idealshowerdoors.com/store/p/pts89) or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze. **How long is the P140HJ?** It comes in a 95" length that you cut to fit your door. **Can I return the P140HJ?** No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your [glass thickness](https://idealshowerdoors.com/store/measure) and check the suggested gap before you order; our measuring guide shows how. Finish the job ## You may also need - [IDEAL Glass Care IDEAL Bath Kit The same professional-grade system we use on your glass, now packaged for home. In three simple steps it lifts away built-up water spots and cloudy haze, seals the surface with a water-repellent protective coating, and buffs it to a brilliant shine. $64.99$84.99 View](https://idealshowerdoors.com/store/p/ideal-bath-kit) - [CRL P14WS Dual-Durometer Seal & Wipe for 1/4" Glass 1/4" glass · 95" $11.03 View](https://idealshowerdoors.com/store/p/p14ws) - [CRL P250HW Multi-Purpose 'H' Wipe for 1/4" Glass 1/4" glass · 95" $13.13 View](https://idealshowerdoors.com/store/p/p250hw) - [CRL PCC8L 'Y' Jamb with Soft Leg for 1/4" & 5/16" Glass 1/4", 5/16" glass · 95" $31.48 View](https://idealshowerdoors.com/store/p/pcc8l) - [CRL 33SMRC Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube) CRL 33S: clear, mildew-resistant 100% silicone for showers. $20.48 View](https://idealshowerdoors.com/store/p/33smrc)