72" Through-Glass Stainless Shower Rod — Brushed Stainless Steel
A 72" stainless steel rod that passes through your glass, most often used as a shower curtain rod off a return panel.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this shower rod
The CRL 72" Through-Glass Stainless Shower Rod is a shower rod for glass showers that fits 1/4" to 1/2" glass. Made by C.R. Laurence (CRL) in 2 finishes, including brushed stainless steel, polished stainless steel.
This 72" stainless steel rod is a handy piece with many uses. Most often it is used as a through-glass curtain rod fastened to a return panel. The 3/4" diameter tube comes with a 3/4" end cap already on one end. The other end attaches to the wall with a separate support bar wall fitting, which is not included. It fits 1/4" to 1/2" tempered glass and needs a 1/2" diameter hole in the glass.
- 72" (1829 mm) long
- 3/4" (19 mm) diameter stainless steel tube
- End cap included on one end
- Fits 1/4" to 1/2" (6 to 12 mm) tempered glass
- Needs a 1/2" (12 mm) hole in the glass; wall fitting sold separately
Specs
| Finishes | 2 |
|---|---|
| Construction | Tubular |
| Diameter | 3/4 in. (19 mm) |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Length | 72 in. (1829 mm) |
| Material | Stainless Steel |
Complete the look in Brushed Stainless Steel
Common questions
What glass thickness does the CRL 72" Through-Glass Stainless Shower Rod fit?
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
What finishes does it come in?
Brushed Stainless Steel, Polished Stainless Steel. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
Designer Robe Hook
1-11/16" Wide Sliding Shower Door Bottom Guide (2-Pack)
Through-the-Glass Tissue Paper Roll Holder
95" Replacement L-Shaped Vinyl Seal
Beveled Frameless Shower Door Stop
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →