Free shippingCRL fees on small ordersNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
Replacement shower door seals

Replacement Shower Door Seals: Where Is It Leaking?

Find where the water gets out, measure your glass thickness, and buy the exact genuine CRL seal below. Every part links to its product page with its current price. Old part number, metric glass or a brand-name door? Use the lookup further down.

Quick answer (3/8" glass, the most common frameless door): leaking under the door = CRL P990WS bottom wipe with drip rail. Door to wall = CRL P375HW 'H' wipe. Door to glass panel in a straight line = CRL P380HJ 'H' jamb. 90° corner = CRL P090SJ. Neo-angle = CRL P135DJ + P135SJ. Door won't stay closed = CRL PMA10 + PMB10 magnetic seals. Every seal pressure fits onto the glass and is cut to length.

Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.

Where is it leaking?

  1. Leaking under the door (bottom of the door)
  2. Leaking on the hinge side, where the door hangs from the wall
  3. Leaking on the latch (strike) side, where the door closes against a wall
  4. Leaking where the door closes against a glass panel in a straight line (180°, glass to glass)
  5. Leaking at a 90° corner, where the door meets a fixed panel at a right angle
  6. Leaking in a neo-angle (135°) shower
  7. Door won't stay closed (glass door closing against a glass panel)

First find the leak: dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops. Then measure the glass thickness at a bare edge (1/4", 5/16", 3/8" or 1/2"). Clip-on seals fit one thickness only; tape-on seals are chosen by the gap and fit any glass.

Leaking under the door (bottom of the door)

Answer: Buy a bottom wipe with drip rail. It pressure fits onto the bottom edge of the door glass: the soft wipe closes the gap to the curb and the drip rail sends water back into the shower. Suggested gap 7/16" between the glass and the curb.

Your glassBuy this exact part
1/4" (6 mm) glassCRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" Glass
5/16" (8 mm) glassCRL P956WS $16.80 Bottom Wipe with Drip Rail for 5/16" Glass
3/8" (10 mm) glass, the most commonCRL P990WS $19.43 Bottom Wipe with Drip Rail for 3/8" Glass
1/2" (12 mm) glassCRL P912WS $21.00 Bottom Wipe with Drip Rail for 1/2" Glass

Other options:

Framed door with a metal bottom track? It takes a slide-in vinyl sweep instead: see framed door sweeps.

More detail: Shower door leaking at the bottom · All Bottom Sweeps & Drip Rails

Leaking on the hinge side, where the door hangs from the wall

Answer: Buy a multi-purpose 'H' wipe for the hinge edge of the door. It pressure fits onto the glass and its soft legs close the gap to the wall while the door swings.

Your glassBuy this exact part
1/4" (6 mm) glassCRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass
5/16" (8 mm) glassCRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass
3/8" (10 mm) glass, the most commonCRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass
1/2" (12 mm) glassCRL P500HW $20.48 Multi-Purpose 'H' Wipe for 1/2" Glass

Other options:

Door hinged to a glass panel instead of a wall? The same 'H' wipe works on the hinge side where the door meets the panel that supports it.

More detail: Leaking on the hinge side or at the wall · All Straight-Line Seals (180°)

Leaking on the latch (strike) side, where the door closes against a wall

Answer: Buy an 'H' wipe for the latch edge of the door, or put a tape-on seal on the wall chosen by the gap.

Your glassBuy this exact part
1/4" (6 mm) glassCRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass
5/16" (8 mm) glassCRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass
3/8" (10 mm) glass, the most commonCRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass
1/2" (12 mm) glassCRL P500HW $20.48 Multi-Purpose 'H' Wipe for 1/2" Glass

Other options:

More detail: Gap between the shower door and the wall · All Bulb & Fin Seals

Leaking where the door closes against a glass panel in a straight line (180°, glass to glass)

Answer: Buy a clear 'H' jamb (all-rigid, nearly invisible) or a 'Y' jamb with a soft leg (quieter close). It pressure fits onto the edge of the fixed panel. Suggested gap 3/16".

Your glassBuy this exact part
1/4" (6 mm) glassCRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" Glass
5/16" (8 mm) glassCRL P516HJ $18.38 Clear 'H' Jamb, 180°, for 5/16" Glass
CRL PCC8 $16.28 'Y' Jamb with Soft Leg, 180°, for 5/16" Glass
3/8" (10 mm) glass, the most commonCRL P380HJ $19.95 Clear 'H' Jamb, 180°, for 3/8" Glass
CRL PCC10 $15.75 'Y' Jamb with Soft Leg, 180°, for 3/8" Glass
1/2" (12 mm) glassCRL P120HJ $20.48 Clear 'H' Jamb, 180°, for 1/2" Glass
CRL PCC12 $16.80 'Y' Jamb with Soft Leg, 180°, for 1/2" Glass

Other options:

More detail: H-jamb vs bulb seal · All Straight-Line Seals (180°)

Leaking at a 90° corner, where the door meets a fixed panel at a right angle

Answer: Buy a 90° strike seal (with vinyl insert) or a clear 'U' with a 90° fin. It pressure fits onto the edge of the fixed panel the door closes against.

Your glassBuy this exact part
1/4" (6 mm) glassNo clip-on seal for this glass. Tape-on, fits any thickness:
CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap
CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
5/16" (8 mm) glassCRL PC0890 $33.58 Clear 'U' with 90° Fin Seal for 5/16" Glass
3/8" (10 mm) glass, the most commonCRL P090SJ $31.48 90° Strike Seal with Vinyl Insert for 3/8" Glass
CRL PC1090 $27.28 Clear 'U' with 90° Fin Seal for 3/8" Glass
1/2" (12 mm) glassNo clip-on seal for this glass. Tape-on, fits any thickness:
CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap
CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)

Other options:

We don't carry a clip-on 90° strike seal for 1/4" or 1/2" swing doors; on those, use one of the tape-on 'L' seals.

More detail: Leaking at the corner panel · All Corner Seals (90° & 135°)

Leaking in a neo-angle (135°) shower

Answer: Buy two seals: a 135° door jamb seal for the hinge side and a 135° strike jamb seal for the angled panel on the latch side. Both pressure fit onto the glass and include a vinyl insert. Suggested gap 3/16".

Your glassBuy this exact part
1/4" (6 mm) glassNo clip-on seal for this glass. Tape-on, fits any thickness:
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap
5/16" (8 mm) glassCRL P045DJ $25.18 135° Neo-Angle Door Jamb Seal for 5/16" Glass
CRL P045SJ $37.78 135° Neo-Angle Strike Jamb Seal for 5/16" Glass
3/8" (10 mm) glass, the most commonCRL P135DJ $29.38 135° Neo-Angle Door Jamb Seal for 3/8" Glass
CRL P135SJ $35.68 135° Neo-Angle Strike Jamb Seal for 3/8" Glass
1/2" (12 mm) glassNo clip-on seal for this glass. Tape-on, fits any thickness:
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap

Other options:

We carry clip-on 135° jamb seals for 3/8" and 5/16" glass only. For 1/4" or 1/2" glass, use the tape-on options.

More detail: Neo-angle and corner shower seals · All Corner Seals (90° & 135°)

Door won't stay closed (glass door closing against a glass panel)

Answer: Buy a pair of magnetic seals: one strip on the door edge and one on the panel edge, so the magnets pull the door shut and hold it. For a door that swings one way in a straight line, pair one 45° left-hand with one 45° right-hand.

Your glassBuy this exact part
1/4" (6 mm) glassCRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass
CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass
5/16" (8 mm) glassCRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass
CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass
3/8" (10 mm) glass, the most commonCRL PMA10 $50.38 Magnetic Seal, 45° Left-Hand, for 3/8"–1/2" Glass
CRL PMB10 $50.38 Magnetic Seal, 45° Right-Hand, for 3/8"–1/2" Glass
1/2" (12 mm) glassCRL PMA10 $50.38 Magnetic Seal, 45° Left-Hand, for 3/8"–1/2" Glass
CRL PMB10 $50.38 Magnetic Seal, 45° Right-Hand, for 3/8"–1/2" Glass

Other options:

Magnetic seals are made for glass to glass. A door that closes against a wall takes an 'H' wipe or a tape-on seal instead (see the latch-side row).

More detail: Shower door won't stay closed · All Magnetic Seals

Still not sure? The Seal Finder shows the seal for the spot you point to, or see the types of shower door seals.

Have an old part number? Look it up

Old part number not sold anymore? Metric glass? A brand-name or big-box store door? Look up your old CRL part number, convert millimeters to inches, or match the seal by its shape. Looking for a current CRL part number? See every genuine CRL part we stock.

Old and discontinued CRL part numbers

Part numbers we don't sell, and the seal we do sell instead. "Same seal" means the same profile in a different length or pack; "closest match" means the nearest seal we carry, with the difference spelled out.

Old partBuy insteadWhy
P990WS36
Bottom wipe with drip rail, 3/8" glass, 36" pieces, 10 per box
P990WS
Same seal, different length or pack
Same co-extruded bottom wipe with drip rail for 3/8" glass and the same 7/16" suggested gap. We sell the 95" length; cut it to your door width.
P912WS36
Bottom wipe with drip rail, 1/2" glass, 36" pieces, 10 per box
P912WS
Same seal, different length or pack
Same bottom wipe with drip rail for 1/2" glass, same 7/16" suggested gap, in the 95" length.
P501BR36
One-piece bottom rail, clear wipe, 3/8" glass, 36" pieces, 10 per box
P501BR
Same seal, different length or pack
Same one-piece bottom rail with clear wipe for 3/8" glass, same 7/16" suggested gap, in the 95" length.
P938WS36
Bottom wipe with "soft" drip rail, 3/8" glass, 36" pieces, 10 per box
P990WS
Closest match (see difference)
Same glass (3/8") and same 7/16" suggested gap, but P990WS has the standard rigid 45° drip rail instead of a soft one. We do not sell the soft drip rail version.
P501BRBL
One-piece bottom rail with black wipe, 3/8" glass (discontinued)
P501BR
Closest match (see difference)
Discontinued. P501BR is the same one-piece bottom rail for 3/8" glass with the same 7/16" gap, with a clear wipe instead of black. If you need black on 3/8" glass, P990WSBL is a black bottom wipe with drip rail (a different shape: wipe plus drip rail, not a one-piece rail).
P501BRW
One-piece bottom rail with white wipe, 3/8" glass (discontinued)
P501BR
Closest match (see difference)
Discontinued. P501BR is the same one-piece bottom rail for 3/8" glass with a clear wipe instead of white. For white on 3/8" glass, P990WSW is a white bottom wipe with drip rail (a different shape).
P120HJ144
'H' jamb 180°, 1/2" glass, 144" length
P120HJ
Same seal, different length or pack
Same clear 'H' jamb for 1/2" glass, same 3/16" suggested gap, in the 95" length.
PCC10118
'Y' inline 180° seal, 3/8" glass, 118" length
PCC10
Same seal, different length or pack
Same 'Y' seal (rigid U with a soft leg) for 3/8" glass in a straight line, in the 95" length.
PCC12118
'Y' inline 180° seal, 1/2" glass, 118" length
PCC12
Same seal, different length or pack
Same 'Y' seal for 1/2" glass, same 3/16" suggested gap, in the 95" length.
PCR10144
Clear bulb seal, 3/8" glass, 144" length
PCR10
Same seal, different length or pack
Same clear bulb seal for 3/8" glass, same 1/4" suggested gap, in the 95" length.
SDLB144
Tape-on bulb seal, 3/16" to 3/8" gap, 144" length
SDLB
Same seal, different length or pack
Same tape-on bulb seal in the 95" length.
SDTB144
Tape-on bulb seal, 5/32" to 7/32" gap, 144" length
SDTB
Same seal, different length or pack
Same tape-on bulb seal in the 95" length.
SDTDF144
Tape-on double-fin seal, 5/16" gap, 144" length
SDTDF
Same seal, different length or pack
Same double-fin seal (5/16" rigid base, 5/16" suggested gap) in the 95" length.
SDTJ144
Tape-on bulb seal, 1/8" to 5/32" gap, 144" length
SDTJ
Same seal, different length or pack
Same tape-on bulb seal in the 95" length.
SDTL144
Tape-on 'L' seal, up to 3/8" gap, 144" length
SDTL
Same seal, different length or pack
Same tape-on 'L' seal in the 95" length.
SDV732M
Gray glazing vinyl for 7/32"–1/4" glass, 1000' roll
SDV732C
Same seal, different length or pack
Same gray glazing vinyl in a 100' roll.
SDV734M
Gray glazing vinyl for 1/4" glass, 1000' roll
SDV734C
Same seal, different length or pack
Same gray glazing vinyl in a 100' roll.
P10MMHJ
'H' jamb 180° for 10 mm glass (metric)
P380HJ
Closest match (see difference)
Same clear 'H' jamb design, made for 3/8" glass (9.5 mm). True 10 mm glass is about 0.5 mm thicker, so the fit will be tighter and is not guaranteed. We do not carry metric-only seals; measure your glass first.
PCJ10
90° strike-side seal for 10 mm glass (metric)
P090SJ
Closest match (see difference)
Both pressure fit onto the fixed panel to seal a door that closes at 90°, but P090SJ is a different profile (a 'U' with a leg and vinyl insert) made for 3/8" glass, 3/16" suggested gap. We do not carry metric-only seals; measure your glass and gap first.
PCJ8
90° strike-side seal for 8 mm glass (metric)
See options
Not carried
We do not carry a 90° strike seal for 8 mm (5/16") glass. Tape-on 'L' seals such as SDTNL (up to 5/16" gap) and SDTL (up to 3/8" gap) close a 90° gap on any glass thickness. See the corner seals.
SD129
Clear very-high-bond tape named in older CRL seal instructions
CAT0401436
Closest match (see difference)
SD129 is no longer listed. CAT0401436 is CRL's clear double-sided acrylic very-high-bond tape, 1/4" wide x 36' roll, for tape-on seals sold without tape.
P912LJT2
Not a CRL part number
P12LJT2
Typo / mix-up
Usually a mix-up for P12LJT2, the clear 1/2" x 1/2" 'L' jamb stop with pre-applied tape.

Metric glass: 6 mm, 8 mm, 10 mm and 12 mm

Clip-on seals are made for one glass thickness. CRL lists them in inches with a metric equivalent (for example "3/8 in. (10 mm)"), but true metric glass is not exactly the inch size, which matters for a seal that grips the glass.

Your glassClosest inch sizeWhat to know
6 mm1/4" glass
13 seals
1/4" is 6.35 mm, so 6 mm glass is about 0.35 mm thinner. A 1/4" clip-on seal can be a little looser.
Gaskets · Straight-Line Seals (180°) · Bottom Sweeps & Drip Rails · Magnetic Seals · Corner Seals (90° & 135°)
8 mm5/16" glass
19 seals
5/16" is 7.94 mm, practically the same as 8 mm.
Gaskets · Corner Seals (90° & 135°) · Straight-Line Seals (180°) · Bottom Sweeps & Drip Rails · Bulb & Fin Seals · Magnetic Seals
10 mm3/8" glass
27 seals
3/8" is 9.53 mm, so 10 mm glass is about 0.5 mm thicker. A 3/8" clip-on seal will be tighter and may not go on.
Gaskets · Corner Seals (90° & 135°) · Straight-Line Seals (180°) · Bottom Sweeps & Drip Rails · Bulb & Fin Seals · Magnetic Seals
12 mm1/2" glass
17 seals
1/2" is 12.7 mm, so 12 mm glass is about 0.7 mm thinner. A 1/2" clip-on seal can be looser.
Straight-Line Seals (180°) · Bottom Sweeps & Drip Rails · Corner Seals (90° & 135°) · Bulb & Fin Seals · Magnetic Seals

Tape-on bulb, fin, 'L' and 'V' seals are chosen by the gap they close, so they fit any glass thickness: see bulb & fin seals. Not sure of your glass? Here's how to measure it.

Seals for brand-name and big-box store doors

Please read first: IDEAL is not affiliated with any of these brands. Our seals may work on their doors, but they are not specifically designed for any brand's system. All sales are final and items cannot be returned, so measure your glass and gap before you order.

DreamLine

DreamLine doors come in several thicknesses. Product listings show 5/16" (8 mm) glass on models such as Duet, and 3/8" (10 mm) on models such as Unidoor Plus and Elegance-LS. Many DreamLine sliding doors use seals shaped for their own track. Our seals may work on DreamLine doors, but they are not specifically designed for DreamLine's system. All sales are final, so measure first. See which seal fits each DreamLine door →

Delta

Delta lists its shower doors with 1/4" (6 mm) or 3/8" (10 mm) glass; many semi-frameless Delta doors are 1/4". Our seals may work on Delta doors, but they are not specifically designed for Delta's system. All sales are final, so measure first. See which seal fits each Delta door →

Kohler

Kohler doors vary by line: Levity listings show 1/4", 5/16" and 3/8" glass versions, and Revel listings show 5/16" glass. Our seals may work on Kohler doors, but they are not specifically designed for Kohler's system. All sales are final, so measure first. See which seal fits each Kohler door →

Sterling

Many Sterling pivot doors, such as Vista Pivot II, are listed with 1/4" glass, and many Sterling doors are framed. A framed door usually takes a slide-in vinyl sweep, not a clip-on seal. Our seals may work on Sterling doors, but they are not specifically designed for Sterling's system. All sales are final, so measure first. See which seal fits each Sterling door →

American Standard

American Standard doors are listed with 1/4", 5/16" and 3/8" glass, depending on the model. Our seals may work on American Standard doors, but they are not specifically designed for American Standard's system. All sales are final, so measure first. See which seal fits each American Standard door →

Basco

Basco makes both framed and frameless doors. Listings range from thin framed-door glass (3/16" and 1/4") up to 3/8" on heavier frameless models. Our seals may work on Basco doors, but they are not specifically designed for Basco's system. All sales are final, so measure first. See which seal fits each Basco door →

Coastal Industries

Check your glass: these doors come in several thicknesses. Our seals may work on Coastal Industries doors, but they are not specifically designed for Coastal Industries's system. All sales are final, so measure first. See which seal fits each Coastal Industries door →

MAAX

MAAX lists glass in millimeters. Models such as Uptown and Halo are listed with 8 mm glass, which is effectively 5/16". Other MAAX doors use other thicknesses, so measure. Our seals may work on MAAX doors, but they are not specifically designed for MAAX's system. All sales are final, so measure first. See which seal fits each MAAX door →

Home Depot / Lowe's (big-box store doors)

Big-box store doors come from many makers and in many thicknesses, from 1/4" up to 3/8" (10 mm), and many are made with metric glass. Measure the glass and the gap; the box or brand name will not tell you which seal fits. Our seals may work on these doors, but they are not specifically designed for any of these makers' systems. All sales are final, so measure first. See which seal fits these doors →

More detail: Replacement seals for DreamLine, Delta, Kohler and other shower doors · How to measure · Seal Finder

Match by what your old seal looks like

No part number at all? Match the shape, then pick the version for your glass thickness. ★ = most common.

Your old seal looks likeSeal typeMost common
A clear strip that pressure fits onto the bottom edge of the glass door, with a soft wipe underneath and often an angled lip on the inside (the drip rail). Sliding doors may have a clear U-channel with a long fin.Bottom Sweeps & Drip RailsP912WS ★ Bottom Wipe with Drip Rail for 1/2" Glass · 1/2"
P990WS ★ Bottom Wipe with Drip Rail for 3/8" Glass · 3/8"
P995WS ★ Bottom Wipe with Drip Rail, Cambridge & Crescent Sliders (3/8") · 3/8"
P450BR Bottom Rail with Replaceable Wipe for 5/16" Glass · 5/16"
A clear strip on the vertical edge of the door or fixed panel, shaped like an H or a Y, where the door closes in a straight line against a glass panel or a wall. Also the H wipes and dual-durometer seals used on the hinge side against a wall.Straight-Line Seals (180°)P375HW ★ Multi-Purpose 'H' Wipe for 3/8" Glass · 3/8"
P880WS ★ Dual-Durometer Seal & Wipe for 3/8" Glass · 3/8"
PCC10 ★ 'Y' Jamb with Soft Leg, 180°, for 3/8" Glass · 3/8"
P120HJ Clear 'H' Jamb, 180°, for 1/2" Glass · 1/2"
A clear strip with a leg or fin set at 90° or 135°, where the door meets glass at a corner or the angle of a neo-angle shower. Also tape-on 'L' and 'V' seals.Corner Seals (90° & 135°)P045DJ 135° Neo-Angle Door Jamb Seal for 5/16" Glass · 5/16"
P045SJ 135° Neo-Angle Strike Jamb Seal for 5/16" Glass · 5/16"
P090SJ 90° Strike Seal with Vinyl Insert for 3/8" Glass · 3/8"
P12LJT2 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) · 1/4", 5/16", 3/8", 1/2"
A round bulb or soft fins running up the vertical edge. Clip-on versions grip the glass; tape-on versions are chosen by the gap they close, not the glass thickness.Bulb & Fin SealsPCR10 ★ Clear Bulb Seal for 3/8" Glass · 3/8"
PCR12 Clear Bulb Seal for 1/2" Glass · 1/2"
PCR8 Clear Bulb Seal for 5/16" Glass · 5/16"
S1LB Clear Silicone Bulb Seal, 1/16"–3/16" Gap · any thickness (by gap)
Two clear strips with magnets inside that pull the door shut against the panel.Magnetic SealsPMA10 Magnetic Seal, 45° Left-Hand, for 3/8"–1/2" Glass · 3/8", 1/2"
PMA8 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass · 1/4", 5/16"
PMB10 Magnetic Seal, 45° Right-Hand, for 3/8"–1/2" Glass · 3/8", 1/2"
PMB8 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass · 1/4", 5/16"
A vinyl sweep that slides into a metal track along the bottom of a framed door.Framed Door SweepsM6184 Round-Top "Bulb" Bottom Seal & Wipe · any thickness (by gap)
M6211 Bottom 'T' Seal & Wipe, 1" · any thickness (by gap)
M6226 36" Flat Vinyl Sweep, 1-1/2" · any thickness (by gap)
M6227 36" "Star Tip" Vinyl Sweep · any thickness (by gap)
Vinyl that presses into a metal channel or header around the glass (not a door seal).GasketsFV4DUC Flexible Glazing Vinyl for Dry-Glaze U-Channel (3/8" Glass) · 3/8"
FV8DUC Flexible Glazing Vinyl for Dry-Glaze U-Channel (5/16" Glass) · 5/16"
HV140 Clear Header Vinyl for 1/4" Glass (per foot) · 1/4"
HV380 Clear Header Vinyl for 3/8" Glass (per foot) · 3/8"

Replacement seals: common questions

What seal do I need for a shower door leaking at the bottom?

A bottom wipe with drip rail that pressure fits onto the bottom of the door glass: CRL P990WS ($19.43) for 3/8" glass, CRL P912WS ($21.00) for 1/2", CRL P956WS ($16.80) for 5/16" and CRL P914WS ($19.95) for 1/4". Cut it to the full width of the door.

What seal goes between a glass shower door and the wall?

A multi-purpose 'H' wipe on the door edge: CRL P375HW ($15.23) for 3/8" glass, CRL P500HW ($20.48) for 1/2", CRL P312HW ($25.18) for 5/16", CRL P250HW ($13.13) for 1/4". Or a tape-on bulb seal chosen by the gap, which fits any glass thickness.

What seal goes where a shower door meets a glass panel in a straight line?

A clear 'H' jamb on the panel edge: CRL P380HJ ($19.95) for 3/8" glass, CRL P120HJ ($20.48) for 1/2", CRL P516HJ ($18.38) for 5/16", CRL P140HJ ($14.18) for 1/4". For a softer, quieter close use a 'Y' jamb such as CRL PCC10 ($15.75) (3/8").

What seal do I need for a 90 degree shower corner?

On 3/8" glass, a 90° strike seal with vinyl insert, CRL P090SJ ($31.48), or a clear 'U' with a 90° fin, CRL PC1090 ($27.28). On 5/16" glass, CRL PC0890 ($33.58). For 1/4" or 1/2" swing doors, use a tape-on 'L' seal such as CRL SDTL ($28.90 / 5-pack).

What seals does a neo-angle shower door need?

Two 135° seals: a door jamb seal on the hinge side and a strike jamb seal on the angled panel on the latch side. For 3/8" glass that is CRL P135DJ ($29.38) + CRL P135SJ ($35.68); for 5/16" glass CRL P045DJ ($25.18) + CRL P045SJ ($37.78).

What fixes a glass shower door that won't stay closed?

A pair of magnetic seals, one on the door and one on the panel. For a door that swings one way in a straight line on 3/8"–1/2" glass, CRL PMA10 ($50.38) (45° left-hand) + CRL PMB10 ($50.38) (45° right-hand); on 1/4"–5/16" glass, CRL PMA8 ($33.58) + CRL PMB8 ($33.58). A door that swings both ways uses two 90° profiles.

Is shipping free?

Shipping is free to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost. All sales are final, so measure your glass first.

What replacement seal fits my DreamLine, Kohler or Delta shower door?

Measure the glass thickness and the gap the seal closes, then match the seal location (bottom, hinge side, latch side, corner). Our CRL seals may work on these brands' doors, but they are not specifically designed for any brand's system. All sales are final, so measure first.

My seal's part number isn't sold anymore. What do I buy?

Look it up in our cross-reference. Many old CRL numbers are the same seal in a different pack or length (for example P990WS36 is a 10-pack of 36" pieces of P990WS). If yours isn't listed, measure your glass and gap and match the shape of the old seal.

What replaced CRL P501BRBL or P501BRW?

Those black and white one-piece bottom rails were discontinued by CRL. The clear P501BR is the same one-piece bottom rail for 3/8" glass. For a black or white bottom seal on 3/8" glass, P990WSBL and P990WSW are bottom wipes with drip rail, a different shape.

Do you sell the 10-packs of 36" bottom sweeps or the 118" and 144" lengths?

No. We sell the 95" length of the same seals (P990WS, P912WS, P501BR, P120HJ, PCC10, PCC12, PCR10 and the tape-on seals) and you cut it to fit.

What seal fits 10 mm glass?

10 mm glass is about 0.5 mm thicker than 3/8" (9.53 mm). CRL lists its 3/8" seals as 10 mm, but on true 10 mm glass a 3/8" clip-on seal will be tight and may not go on. Measure your glass. Tape-on bulb and fin seals are chosen by gap and fit any thickness.

What seal fits 8 mm glass?

8 mm is practically the same as 5/16" (7.94 mm), so 5/16" seals fit 8 mm glass.

What seal fits 6 mm or 12 mm glass?

6 mm is close to 1/4" and 12 mm is close to 1/2", but both are a little thinner than the inch size, so a clip-on seal can be slightly loose. Measure before you order.

What tape replaced CRL SD129?

SD129 is no longer listed. CAT0401436 is CRL's clear double-sided acrylic very-high-bond tape, 1/4" wide x 36', for tape-on seals sold without tape.

Can I return a seal if it doesn't fit my door?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass and gap carefully before ordering.

Not sure which seal you need?

Use our Seal Finder

Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.

Start the Seal Finder →