Free shipping on every ordersee exceptionsNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
CRL PCC10 'Y' Jamb with Soft Leg, 180°, for 3/8" Glass profile and installed drawing
Most common
CRL · Part PCC10In stock

'Y' Jamb with Soft Leg, 180°, for 3/8" Glass

Straight-line seal with a soft leg for a quieter close.

$15.75
+ Free shipping
3/8"Glass thickness
3/16"Gap
95"Cut to fit
Pressure fitNo tape needed
Color: Clear
Ships free to your doorFree on every order to the lower 48 states and DC. Usually ships in 3–7 business days.
Cut it to lengthCRL PTS89 Plastic Trim Snips for Cutting SealsClean, straight or angled cuts on vinyl and plastic seals. $88.49
Free shippingOn every order
All sales finalCheck your glass thickness.
Not sure it fits?Try the Seal Finder
OverviewSpecsFAQGuides

About this seal

The CRL PCC10 is a 95-inch 'y' jamb with soft leg, 180°, for 3/8-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear, black, white.

A rigid 'U' pressure fits onto the fixed panel, and a soft vinyl leg cushions the door as it closes, so it seals without the clack of hard plastic. For doors that close in a straight line. For 3/8" glass. 95" length, cut to fit.

  • Soft leg for a quiet close
  • Rigid clip stays put
  • Suggested gap: 3/16"
  • 95" length, cut to fit

Fit & specs

Glass thickness3/8"
Gap3/16"
Installs byPressure fits onto the glass
Used forDoor to fixed glass panel (straight line)
Latch (strike) side
Length95 in. (2413 mm)
MaterialPolycarbonate
Pre-Applied TapeNo

Common questions

What glass thickness does the CRL PCC10 fit?

The CRL PCC10 fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.

What gap does the PCC10 seal?

The suggested gap is 3/16". Measure with the door closed.

How do I install the CRL PCC10?

It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.

How do I cut the CRL PCC10 to length?

Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.

How long is the PCC10?

It comes in a 95" length that you cut to fit your door.

What colors does the PCC10 come in?

Clear, Black, White.

Can I return the PCC10?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.

Finish the job

You may also need

Related guide

How Much Does It Cost to Replace a Shower Door Seal?

Doing it yourself is always the cheaper way if you can manage it.

Read the guide →