Dual-Durometer Seal & Wipe for 3/8" Glass
Pivot-side seal: runs up the door edge and the soft lip seals against the wall.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL P880WS is a 95-inch dual-durometer seal & wipe for 3/8-inch glass, with a suggested 1/4" gap. Made by C.R. Laurence (CRL); available in clear, black.
The industry-standard way to use this seal: pressure fit it up the pivot-side edge of the door and the soft lip seals the gap against the wall. It also works on the bottom of the door as a wipe, or on an overlapping bi-fold door. For 3/8" glass. 95" length, cut to fit.
- Seals the pivot side of the door against the wall
- Also works as a bottom sweep or bi-fold seal
- Rigid clip, soft sealing lip
- Suggested gap: 1/4"
- 95" length, cut to fit
Fit & specs
| Glass thickness | 3/8" |
|---|---|
| Gap | 1/4" |
| Installs by | Pressure fits onto the glass |
| Used for | Hinge or pivot side Door against a wall Bottom of the door Door to fixed glass panel (straight line) |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P880WS fit?
The CRL P880WS fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P880WS seal?
The suggested gap is 1/4". Measure with the door closed.
How do I install the CRL P880WS?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P880WS to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P880WS?
It comes in a 95" length that you cut to fit your door.
What colors does the P880WS come in?
Clear, Black.
Can I return the P880WS?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Most commonMulti-Purpose 'H' Wipe for 3/8" Glass
Most common'Y' Jamb with Soft Leg, 180°, for 3/8" Glass
One-Piece Heavy-Duty 'H' Jamb, 180°, for 3/8" Glass
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
Shower Door Leaking at the Bottom? How to Fix It
Water on the bathroom floor almost always comes from one of four places.
Read the guide →