Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
Rigid clear door stop for the hinge or latch side. Peel and stick.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL P12LJT2 is a 95-inch clear polycarbonate 'L' jamb (1/2 x 1/2 inch) with clear tape pre-applied. It tapes to the wall or fixed panel as a door stop on the hinge or latch side of frameless doors with 1/4-inch to 1/2-inch glass, and is popular on 135-degree neo-angle showers. Made by C.R. Laurence (CRL).
A rigid clear polycarbonate 'L' with two 1/2" legs and clear very hi-bond tape already applied. Peel the liner and stick it to the wall or the edge of the fixed glass panel, and the door closes against the other leg. That stops the door at the closed position so it only swings one way, and it covers the gap where the door meets the wall or panel. Works on the hinge side or the latch side, and is especially popular in 135° neo-angle showers between the door and the angled panel. Fits doors with 1/4" to 1/2" glass. 95" length, cut to fit.
- Rigid 1/2" x 1/2" clear polycarbonate
- Stops the door so it swings one way only
- Hinge or latch side; popular on 135° neo-angles
- Pre-applied clear tape, 95" length, cut to fit
Fit & specs
| Glass thickness | 1/4", 5/16", 3/8", 1/2" |
|---|---|
| Door swing | One direction only |
| Installs by | Peel and stick (tape applied) |
| Used for | 135° neo-angle 90° corner Hinge or pivot side Latch (strike) side Door against a wall |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | Yes |
Common questions
What does a clear 'L' jamb do on a frameless shower door?
It is a door stop. One leg tapes to the wall or the fixed glass panel and the closed door rests against the other leg, so the door stops in the closed position, swings one way only, and the gap at the hinge or latch side is covered.
Can I use the P12LJT2 on a neo-angle shower?
Yes. It is especially popular in 135° neo-angle showers, taped to the angled fixed panel so the door closes against it. It also works where a door closes against a wall.
What glass thickness does the CRL P12LJT2 work with?
Doors with 1/4" to 1/2" glass. It tapes to the wall or panel instead of gripping the door glass, so one size covers all four common thicknesses.
How do I install the CRL P12LJT2?
Cut it to length, clean the wall or glass edge with alcohol and let it dry, then close the door, peel the liner and press the taped leg in place so the free leg sits against the door. Hold firm pressure along the full length.
How do I cut the CRL P12LJT2 to length?
Measure the edge where it goes, then cut it with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
Can I return the P12LJT2?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Check your glass thickness and how your door closes before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
135° Neo-Angle Door Jamb Seal for 5/16" Glass
135° Neo-Angle Strike Jamb Seal for 5/16" Glass
90° Strike Seal with Vinyl Insert for 3/8" Glass
