Replacement Seals for Delta Shower Doors
Delta glass doors are listed in millimeters: mostly 6 mm (1/4") or 10 mm (3/8"), and at least one newer line, EverEdge, in 8 mm (5/16"). Measure the edge of your door glass, find where it leaks, and buy the genuine CRL seal for that spot.
Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.
Which Delta door do you have?
Glass thickness as Delta and its retailers list it. Doors change over the years, so measure a bare edge of your glass to be sure.
| Delta door | Type | Glass |
|---|---|---|
| Traditional and other semi-frameless doors | Sliding door | 1/4" (6 mm) |
| Mod | Sliding door | 1/4" (6 mm) |
| Frameless sliding doors (SDGS160 panels) | Sliding door | 3/8" (10 mm) |
| EverEdge | Sliding door | 5/16" (8 mm) |
| Pivot and hinged doors | Pivot / hinged door | 1/4" or 3/8": measure |
Where is your Delta door leaking?
For hinged and pivot doors. Find the spot, then buy the part for your glass. Every seal pressure fits onto the glass and is cut to length. Not sure where it leaks? Dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops.
| Where it leaks | 1/4" (6 mm) glass | 5/16" (8 mm) glass | 3/8" (10 mm) glass |
|---|---|---|---|
| Leaking under the door (bottom of the door) | CRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" Glass | CRL P956WS $16.80 Bottom Wipe with Drip Rail for 5/16" Glass | CRL P990WS $19.43 Bottom Wipe with Drip Rail for 3/8" Glass |
| Leaking on the hinge side, where the door hangs from the wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass | CRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass |
| Leaking on the latch (strike) side, where the door closes against a wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass | CRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass |
| Leaking where the door closes against a glass panel in a straight line (180°, glass to glass) | CRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" Glass | CRL P516HJ $18.38 Clear 'H' Jamb, 180°, for 5/16" Glass CRL PCC8 $16.28 'Y' Jamb with Soft Leg, 180°, for 5/16" Glass | CRL P380HJ $19.95 Clear 'H' Jamb, 180°, for 3/8" Glass CRL PCC10 $15.75 'Y' Jamb with Soft Leg, 180°, for 3/8" Glass |
| Leaking at a 90° corner, where the door meets a fixed panel at a right angle | No clip-on seal for this glass. Tape-on, any thickness: CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) | CRL PC0890 $33.58 Clear 'U' with 90° Fin Seal for 5/16" Glass | CRL P090SJ $31.48 90° Strike Seal with Vinyl Insert for 3/8" Glass CRL PC1090 $27.28 Clear 'U' with 90° Fin Seal for 3/8" Glass |
| Leaking in a neo-angle (135°) shower | No clip-on seal for this glass. Tape-on, any thickness: CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap | CRL P045DJ $25.18 135° Neo-Angle Door Jamb Seal for 5/16" Glass CRL P045SJ $37.78 135° Neo-Angle Strike Jamb Seal for 5/16" Glass | CRL P135DJ $29.38 135° Neo-Angle Door Jamb Seal for 3/8" Glass CRL P135SJ $35.68 135° Neo-Angle Strike Jamb Seal for 3/8" Glass |
| Door won't stay closed (glass door closing against a glass panel) | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass | CRL PMA10 $50.38 Magnetic Seal, 45° Left-Hand, for 3/8"–1/2" Glass CRL PMB10 $50.38 Magnetic Seal, 45° Right-Hand, for 3/8"–1/2" Glass |
Each spot has more options and the suggested gap on our replacement seals by leak page. Different glass thickness? See all sizes there.
Delta sliding doors
Most Delta glass doors are sliders, and their seals depend on Delta's own track kit, sold by glass thickness. Our clip-on seals are made for hinged and pivot doors, so on a Delta slider most of them won't fit the same way. The one common exception is where a 3/8" (10 mm) sliding door closes against the wall: CRL PCR10 is made for that spot.
Delta seals: common questions
Will a CRL seal fit my Delta shower door?
On a Delta hinged or pivot door, often yes, if you match the glass thickness and the leak spot. On a Delta sliding door, mostly no: those use seals made for Delta's own track. IDEAL isn't affiliated with Delta and all sales are final, so measure first.
What thickness is Delta shower door glass?
Delta lists most of its doors with 6 mm (1/4") or 10 mm (3/8") glass; semi-frameless doors are usually 6 mm. The EverEdge line is listed with 8 mm (5/16") glass. Measure a bare edge to be sure.
Delta glass is listed in millimeters. Which inch size do I buy?
6 mm is our 1/4" size, 8 mm is 5/16" and 10 mm is 3/8". Metric glass isn't exactly the inch size, so a seal that grips the glass can fit a little tight or loose. Our replacement seals page explains metric glass.
Use our Seal Finder
Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.