Clear Vinyl 'L' Seal, up to 3/8" Gap
Tape-on 'L' seal for the hinge or latch side of outswing doors.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL SDTL is a 95-inch clear vinyl 'l' seal, up to 3/8" gap, closing gaps up to 3/8". Made by C.R. Laurence (CRL); available in clear.
The rigid leg tapes to the glass edge or wall, and the soft leg seals as the door closes, quietly and forgivingly. For outswing doors only. Seals gaps up to 3/8". Mount with clear double-sided VHB tape (not included). 95" length, cut to fit. Sold in a minimum of 5.
- Seals gaps up to 3/8"
- Outswing doors, hinge or latch side
- Tape not included
- Minimum order: 5
Fit & specs
| Glass thickness | Any |
|---|---|
| Gap | up to 3/8" |
| Door swing | One direction only |
| Installs by | Clear VHB tape (not included) |
| Used for | 90° corner Hinge or pivot side Latch (strike) side Door against a wall |
| Length | 95 in. (2413 mm) |
| Material | Vinyl |
| Pre-Applied Tape | No |
Common questions
Does the SDTL depend on glass thickness?
No. The SDTL mounts to the glass edge or wall, so choose it by the gap it closes (up to 3/8") rather than by glass thickness.
What gap does the SDTL seal?
It closes gaps up to 3/8". Measure with the door closed.
How do I install the CRL SDTL?
Mount it with clear double-sided VHB tape (sold separately) on a clean, dry glass edge or wall.
How do I cut the CRL SDTL to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the SDTL?
It comes in a 95" length that you cut to fit your door.
Can I return the SDTL?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Clear Vinyl 'L' Seal, up to 3/8" Gap (Pre-Taped)
Clear Vinyl 'L' Seal, up to 5/16" Gap
Clear Vinyl 'L' Seal, up to 5/16" Gap (Pre-Taped)
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
Why Is There a Gap Between My Shower Door and the Wall?
The gap is on purpose: a glass door needs room to swing without hitting the wall.
Read the guide →