
Clear VHB Mounting Tape, 1/4" x 36'
The tape for stick-on shower seals.
About this product
The CRL CAT0401436 is a clear vhb mounting tape, 1/4" x 36'. Made by C.R. Laurence (CRL); available in clear.
Double-sided clear acrylic very-high-bond tape made for shower enclosures. It mounts the flat base of bulb, fin, 'L', 'V' and 'T' seals to the glass edge or wall and holds up to moisture. Clean and dry both surfaces first. 1/4" wide, .040" thick, 36-foot roll: enough for several seals.
- Made for shower seals and wipes
- Clear, double-sided, moisture resistant
- 1/4" x 36' roll
Fit & specs
| Glass thickness | Any |
|---|---|
| Used for | Installation supplies |
| Roll Length | 36 ft. (11 m) |
| Shelf Life | 24 Months |
| Thickness | 0.04 in. (1.02 mm |
| Type | Acrylic |
| Width | 1/4 in. (6 mm) |
Common questions
What is VHB tape used for on shower doors?
VHB (very-high-bond) tape mounts stick-on seals, like bulb, fin, L and V seals, to the glass edge or the wall. It is double-sided, clear and made to hold up to moisture.
Will VHB tape hold in a wet shower?
Yes, when the surface is clean and dry before you apply it. Wipe the glass or wall with rubbing alcohol first, press the seal firmly, and let it set before the shower gets wet.
How do I remove old VHB tape?
Scrape it off with a single-edge razor blade in a holder like the CRL RS65, and loosen stubborn residue with the CRL CRLSRK1T remover kit.
Can I return the CAT0401436?
No. All sales are final, so please check that it is the right product before you order.
You may also need
Ships from IDEALIDEAL Bath Kit

Plastic Trim Snips for Cutting Seals

Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)

Single-Edge Razor Blades (100-Pack)

Razor Blade Holder and Scraper
Shower Door Seal Keeps Falling Off? How to Fix It
A seal that keeps sliding or dropping off is almost always one of three things: it's made for a different glass thickness, the glass edge was dirty when it went on, or the tape on a stick-on seal has worn out..
Read the guide →