Clear Vinyl 'L' Seal, up to 3/8" Gap (Pre-Taped)
Tape-on 'L' seal for the hinge or latch side of outswing doors.
The CRL SDTLT2 is a 95-inch clear vinyl 'l' seal, up to 3/8" gap (pre-taped), closing gaps up to 3/8". Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Seals gaps up to 3/8"
- Outswing doors, hinge or latch side
- Pre-applied tape
- Minimum order: 5
About this seal
The rigid leg tapes to the glass edge or wall, and the soft leg seals as the door closes, quietly and forgivingly. For outswing doors only. Seals gaps up to 3/8". Comes with tape already applied: just peel and stick. 95" length, cut to fit. Sold in a minimum of 5.
Fit & specs
| Glass thickness | Any |
|---|---|
| Gap | up to 3/8" |
| Door swing | One direction only |
| Installs by | Peel and stick (tape applied) |
| Used for | 90° corner Hinge or pivot side Latch (strike) side Door against a wall |
| Length | 95 in. (2413 mm) |
| Material | Vinyl |
| Pre-Applied Tape | Yes |
Common questions
Does the SDTLT2 depend on glass thickness?
No. The SDTLT2 mounts to the glass edge or wall, so choose it by the gap it closes (up to 3/8") rather than by glass thickness.
What gap does the SDTLT2 seal?
It closes gaps up to 3/8". Measure with the door closed.
How do I install the CRL SDTLT2?
It comes with clear tape already applied: clean the surface, peel the liner and press it in place.
How do I cut the CRL SDTLT2 to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the SDTLT2?
It comes in a 95" length that you cut to fit your door.
Can I return the SDTLT2?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
Related seals
Clear Vinyl 'L' Seal, up to 3/8" Gap
Clear Vinyl 'L' Seal, up to 5/16" Gap
Clear Vinyl 'L' Seal, up to 5/16" Gap (Pre-Taped)
