Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap
Tape-on 'V' seal for doors that swing one way.
The CRL SDTS is a 95-inch clear vinyl 'v' edge seal, 3/16"–1/4" gap, closing gaps 3/16" to 1/4". Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Seals gaps 3/16" to 1/4"
- One-way swing doors
- Tape not included
- Minimum order: 5
Related guides
About this seal
The rigid leg tapes to the glass edge or wall and the door closes into the soft vinyl leg. Seals gaps from 3/16" to 1/4". For doors that swing in one direction only. Mount with clear double-sided VHB tape (not included). 95" length, cut to fit. Sold in a minimum of 5.
Fit & specs
| Glass thickness | Any |
|---|---|
| Gap | 3/16" to 1/4" |
| Door swing | One direction only |
| Installs by | Clear VHB tape (not included) |
| Used for | 135° neo-angle 90° corner Latch (strike) side Door against a wall |
| Length | 95 in. (2413 mm) |
| Material | Vinyl |
| Pre-Applied Tape | No |
Common questions
Does the SDTS depend on glass thickness?
No. The SDTS mounts to the glass edge or wall, so choose it by the gap it closes (3/16" to 1/4") rather than by glass thickness.
What gap does the SDTS seal?
It closes gaps from 3/16" to 1/4". Measure with the door closed.
How do I install the CRL SDTS?
Mount it with clear double-sided VHB tape (sold separately) on a clean, dry glass edge or wall.
How do I cut the CRL SDTS to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the SDTS?
It comes in a 95" length that you cut to fit your door.
Can I return the SDTS?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
Related seals
Clear Vinyl 'L' Seal, up to 3/8" Gap
Clear Vinyl 'L' Seal, up to 3/8" Gap (Pre-Taped)
Clear Vinyl 'L' Seal, up to 5/16" Gap
