Bottom Wipe with Drip Rail for 1/4" Glass
Our most popular bottom sweep. Pressure fits onto the bottom of the door.
The CRL P914WS is a 95-inch bottom wipe with drip rail for 1/4-inch glass, with a suggested 7/16" gap. Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Most popular bottom seal for frameless swing doors
- 45° drip rail turns water back into the shower
- Suggested gap under the door: 7/16"
- 95" length, cut to fit
Related guides
About this seal
Two soft wipes seal against the curb while the 45° drip rail on the outside sheds water back into the shower. Made for frameless swing doors with 1/4" glass. Comes in a 95" length that you cut to the width of your door.
Fit & specs
| Glass thickness | 1/4" |
|---|---|
| Gap | 7/16" |
| Installs by | Pressure fits onto the glass |
| Used for | Bottom of the door |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P914WS fit?
The CRL P914WS fits 1/4" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P914WS seal?
The suggested gap is 7/16". Measure with the door closed.
How do I install the CRL P914WS?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P914WS to length?
Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.
How long is the P914WS?
It comes in a 95" length that you cut to fit your door.
Can I return the P914WS?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.