How to Tell Your Shower Glass Thickness Without a Tape Measure
Stack US nickels against a bare edge of the glass and match the height: 3 nickels is about 1/4" (6 mm), 4 is about 5/16" (8 mm), 5 is about 3/8" (10 mm) and 6 is about 1/2" (12 mm). Most frameless swing doors are 3/8", and the most common mistake is confusing 1/4" and 3/8" glass, so it is worth the 30-second check before you order a seal.
The nickel test
A US nickel is 1.95 mm thick, which makes a stack of them a handy ruler for glass. Glass sold as 1/4", 5/16", 3/8" and 1/2" is close to 6, 8, 10 and 12 mm, so the stack height lines up with one size and is clearly off for the others.
- Find a bare edge. Open the door and find an edge of the glass with nothing on it: no seal, hinge or handle. The top edge or the handle side usually works.
- Stack the nickels beside the edge. Hold a small stack of nickels right next to the edge, lying flat the same way the glass does, so the bottom nickel lines up with one face of the glass.
- Match the other face. Add or remove nickels until the top nickel lines up with the other face of the glass. 3 = 1/4", 4 = 5/16", 5 = 3/8", 6 = 1/2".
- Double-check. Repeat on another edge. The answer should be the same everywhere.
| Nickels | Old plastic cards (about) | Your glass |
|---|---|---|
| 3 | 8 | 1/4" (6 mm) |
| 4 | 10 to 11 | 5/16" (8 mm) |
| 5 | 12 to 13 | 3/8" (10 mm) |
| 6 | 16 | 1/2" (12 mm) |
No nickels? Old gift cards or hotel key cards work too: a standard plastic card is 0.76 mm thick, so use the card column above.
Quick clues from your door
- Frameless swing door with hinges clamped right onto the glass: almost always 3/8", sometimes 1/2" on heavy, high-end doors.
- Door in a metal frame, or an older sliding door: usually 1/4" or thinner. Framed doors often take a slide-in vinyl sweep instead of a clip-on seal.
- Semi-frameless or imported doors: often 5/16" (8 mm) or 1/4".
Clues help you guess, but a clip-on seal only fits one thickness, so always confirm with the nickels or a tape measure.
Mistakes that lead to the wrong seal
- Measuring the old seal. A seal on the edge adds thickness. Measure where the glass is bare, or slide the old seal off first.
- Guessing 1/4" vs 3/8". This is the mix-up we see most. 3/8" glass is half again as thick as 1/4": 5 nickels versus 3, a difference you can't miss side by side.
- Ordering for the wrong piece. A door and the fixed panel next to it are usually the same thickness, but not always. Check the piece the seal goes on.
Clip-on seals are made for one glass thickness, and all sales are final, so a 30-second check saves a second order. Tape-on bulb, fin, 'L' and 'V' seals are chosen by the gap instead and fit any glass. Once you know your size, the Seal Finder shows only the seals that fit.
Use our Seal Finder
Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.
Products in this guide
Common questions
How can I tell how thick my shower glass is without a ruler?
Stack US nickels against a bare edge of the glass: 3 nickels is about 1/4", 4 is 5/16", 5 is 3/8" and 6 is 1/2". Old plastic cards work too: about 8 cards for 1/4" and 12 to 13 for 3/8".
Is my shower door 1/4" or 3/8" glass?
Frameless swing doors with hinges clamped onto the glass are almost always 3/8". Framed and older sliding doors are usually 1/4". To be sure, stack nickels against the edge: 3 nickels means 1/4", 5 means 3/8".
How thick is a nickel?
A US nickel is 1.95 mm thick, about 1/13 of an inch, which is why 5 nickels make about 3/8" (10 mm).
Does a 3/8" seal fit 1/4" glass?
No. Clip-on seals grip one glass thickness, so a 3/8" seal will be loose on 1/4" glass and a 1/4" seal won't fit on 3/8". Tape-on seals are the exception: they are chosen by the gap and fit any glass.



