Free shippingCRL fees on small ordersNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
Shower Door Bottom Sweep: Bottom Wipe with Drip Rail for 3/8" Glass, Clear – CRL P990WS profile drawing
Most common
CRL · Part P990WSIn stock

Bottom Wipe with Drip Rail for 3/8" Glass

Our most popular bottom sweep. Pressure fits onto the bottom of the door.

$19.43
+ Free shipping
3/8"Glass thickness
7/16"Gap
95"Cut to fit
Pressure fitNo tape needed
Color: Clear
Ships free to your doorFree to the lower 48 states and DC. Usually ships in 3–7 business days.
Plastic Trim Snips for Cutting Seals, Black – CRL PTS89 product photo
Cut it to lengthCRL PTS89 Plastic Trim Snips for Cutting SealsClean, straight or angled cuts on vinyl and plastic seals. $88.49
Free shippingLower 48 & DC
All sales finalCheck your glass thickness.
Not sure it fits?Try the Seal Finder
OverviewSpecsFAQGuides

About this seal

The CRL P990WS is a 95-inch bottom wipe with drip rail for 3/8-inch glass, with a suggested 7/16" gap. Made by C.R. Laurence (CRL); available in clear, black, white.

Two soft wipes seal against the curb while the 45° drip rail on the outside sheds water back into the shower. Made for frameless swing doors with 3/8" glass. Comes in a 95" length that you cut to the width of your door.

  • Most popular bottom seal for frameless swing doors
  • 45° drip rail turns water back into the shower
  • Suggested gap under the door: 7/16"
  • 95" length, cut to fit

Fit & specs

Glass thickness3/8"
Gap7/16"
Installs byPressure fits onto the glass
Used forBottom of the door
Length95 in. (2413 mm)
MaterialPolycarbonate
Pre-Applied TapeNo

Common questions

What glass thickness does the CRL P990WS fit?

The CRL P990WS fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.

What gap does the P990WS seal?

The suggested gap is 7/16". Measure with the door closed.

How do I install the CRL P990WS?

It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.

How do I cut the CRL P990WS to length?

Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.

How long is the P990WS?

It comes in a 95" length that you cut to fit your door.

What colors does the P990WS come in?

Clear, Black, White.

Can I return the P990WS?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.

Finish the job

You may also need