Free shipping on every ordersee exceptionsNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
CRL P501BR One-Piece Bottom Rail for 3/8" Glass profile and installed drawing
CRL · Part P501BRIn stock

One-Piece Bottom Rail for 3/8" Glass

Ultra-clear one-piece sweep. Pressure fits onto the bottom of the door.

$19.95
+ Free shipping
3/8"Glass thickness
7/16"Gap
95"Cut to fit
Pressure fitNo tape needed
Ships free to your doorFree on every order to the lower 48 states and DC. Usually ships in 3–7 business days.
Cut it to lengthCRL PTS89 Plastic Trim Snips for Cutting SealsClean, straight or angled cuts on vinyl and plastic seals. $88.49
Free shippingOn every order
All sales finalCheck your glass thickness.
Not sure it fits?Try the Seal Finder
OverviewSpecsFAQGuides

About this seal

The CRL P501BR is a 95-inch one-piece bottom rail for 3/8-inch glass, with a suggested 7/16" gap. Made by C.R. Laurence (CRL); available in clear.

A single-piece bottom rail with a built-in vinyl wipe that hangs down and firmly directs water back into the shower. Because it is one piece, there is no insert to come loose. For 3/8" glass. 95" length, cut to fit.

  • One-piece design, nothing to come apart
  • Ultra-clear finish
  • Suggested gap under the door: 7/16"
  • 95" length, cut to fit

Fit & specs

Glass thickness3/8"
Gap7/16"
Installs byPressure fits onto the glass
Used forBottom of the door
Length95 in. (2413 mm)
MaterialPolycarbonate
Pre-Applied TapeNo

Common questions

What glass thickness does the CRL P501BR fit?

The CRL P501BR fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.

What gap does the P501BR seal?

The suggested gap is 7/16". Measure with the door closed.

How do I install the CRL P501BR?

It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.

How do I cut the CRL P501BR to length?

Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.

How long is the P501BR?

It comes in a 95" length that you cut to fit your door.

Can I return the P501BR?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.

Finish the job

You may also need

Related guide

Shower Door Sweep vs. Drip Rail: What's the Difference?

They do two different jobs at the bottom of the door, and the most popular frameless bottom seals combine both in one piece..

Read the guide →