135° Neo-Angle Door Jamb Seal for 3/8" Glass
Hinge-side seal for neo-angle showers. Vinyl insert included.
The CRL P135DJ is a 95-inch 135° neo-angle door jamb seal for 3/8-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- For 135° neo-angle showers
- Hinge side of the door
- Vinyl insert included
- Suggested gap: 3/16"
Related guides
About this seal
Pressure fits onto the hinge side of the door to seal against the fixed panel in a 135° neo-angle shower. A clear vinyl insert is included. For 3/8" glass. 95" length, cut to fit.
Fit & specs
| Glass thickness | 3/8" |
|---|---|
| Gap | 3/16" |
| Installs by | Pressure fits onto the glass |
| Used for | 135° neo-angle Hinge or pivot side |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P135DJ fit?
The CRL P135DJ fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P135DJ seal?
The suggested gap is 3/16". Measure with the door closed.
How do I install the CRL P135DJ?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P135DJ to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P135DJ?
It comes in a 95" length that you cut to fit your door.
Can I return the P135DJ?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
