Free shipping on every ordersee exceptionsNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
CRL P135SJ 135° Neo-Angle Strike Jamb Seal for 3/8" Glass profile and installed drawing
CRL · Part P135SJIn stock

135° Neo-Angle Strike Jamb Seal for 3/8" Glass

Latch-side seal for the angled panel of a neo-angle shower. Vinyl insert included.

$35.68
+ Free shipping
3/8"Glass thickness
3/16"Gap
95"Cut to fit
Pressure fitNo tape needed
Ships free to your doorFree on every order to the lower 48 states and DC. Usually ships in 3–7 business days.
Cut it to lengthCRL PTS89 Plastic Trim Snips for Cutting SealsClean, straight or angled cuts on vinyl and plastic seals. $88.49
Free shippingOn every order
All sales finalCheck your glass thickness.
Not sure it fits?Try the Seal Finder
OverviewSpecsFAQGuides

About this seal

The CRL P135SJ is a 95-inch 135° neo-angle strike jamb seal for 3/8-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear.

Pressure fits onto the mitered latch-side panel in a 135° neo-angle shower. A clear vinyl insert is included. For 3/8" glass. 95" length, cut to fit.

  • For 135° neo-angle showers
  • Latch side panel
  • Vinyl insert included
  • Suggested gap: 3/16"

Fit & specs

Glass thickness3/8"
Gap3/16"
Installs byPressure fits onto the glass
Used for135° neo-angle
Latch (strike) side
Length95 in. (2413 mm)
MaterialPolycarbonate
Pre-Applied TapeNo

Common questions

What glass thickness does the CRL P135SJ fit?

The CRL P135SJ fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.

What gap does the P135SJ seal?

The suggested gap is 3/16". Measure with the door closed.

How do I install the CRL P135SJ?

It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.

How do I cut the CRL P135SJ to length?

Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.

How long is the P135SJ?

It comes in a 95" length that you cut to fit your door.

Can I return the P135SJ?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.

Finish the job

You may also need

Related guide

Neo-Angle Shower Door Seal Replacement

A neo-angle shower has two angled panels that meet the door at 135°.

Read the guide →