Free shippingCRL fees on small ordersNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
Replacement shower door seals

Replacement Seals for Coastal Industries Shower Doors

Coastal Industries (Paragon) doors mostly use thin glass: 5/32" to 3/16" on framed and some frameless models, and 1/4" (6 mm) on the Paragon 2700 frameless series. Measure the edge of your door glass first.

Please read first: IDEAL is not affiliated with Coastal Industries. These are genuine CRL seals, not Coastal Industries parts. They may work on Coastal Industries doors, but they are not specifically designed for Coastal Industries's system. All sales are final and items cannot be returned, so measure your glass and the gap before you order.

Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.

Which Coastal Industries door do you have?

Glass thickness as Coastal Industries and its retailers list it. Doors change over the years, so measure a bare edge of your glass to be sure.

Coastal Industries doorTypeGlass
Paragon framed (1700 series)Framed door5/32" or 3/16"
Paragon frameless 5200 seriesFrameless door3/16"
Paragon frameless 2700 seriesFrameless door1/4" (6 mm)
Legend and other modelsFramed doorMeasure

Where is your Coastal Industries door leaking?

For hinged and pivot doors. Find the spot, then buy the part for your glass. Every seal pressure fits onto the glass and is cut to length. Not sure where it leaks? Dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops.

Where it leaks1/4" (6 mm) glass
Leaking under the door (bottom of the door)CRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" Glass
Leaking on the hinge side, where the door hangs from the wallCRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass
Leaking on the latch (strike) side, where the door closes against a wallCRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass
Leaking where the door closes against a glass panel in a straight line (180°, glass to glass)CRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" Glass
Leaking at a 90° corner, where the door meets a fixed panel at a right angleNo clip-on seal for this glass. Tape-on, any thickness:
CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap
CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
Leaking in a neo-angle (135°) showerNo clip-on seal for this glass. Tape-on, any thickness:
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap
Door won't stay closed (glass door closing against a glass panel)CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass
CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass

Each spot has more options and the suggested gap on our replacement seals by leak page. Different glass thickness? See all sizes there.

Framed doors and thin glass

Glass thinner than 1/4" is thinner than any clip-on seal we carry. On 5/32" or 3/16" glass, use a tape-on seal chosen by the gap, or a slide-in vinyl sweep if the door has a metal bottom rail: see our tape-on seals and framed door sweeps.

Coastal Industries seals: common questions

Will a CRL seal fit my Coastal Industries shower door?

On a Paragon 2700 frameless door with 1/4" glass, the 1/4" CRL seals on this page are made for that glass. Most other Coastal doors use 3/16" or thinner glass, which takes a tape-on seal or a slide-in sweep instead. IDEAL isn't affiliated with Coastal and all sales are final, so measure first.

What thickness is Coastal Industries shower door glass?

Paragon framed doors are listed with 5/32" or 3/16" glass, the 5200 frameless series with 3/16", and the 2700 frameless series with 1/4" (6 mm).

Not sure which seal you need?

Use our Seal Finder

Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.

Start the Seal Finder →