Free shippingCRL fees on small ordersNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
Replacement shower door seals

Replacement Seals for Sterling Shower Doors

Many Sterling doors are framed, with thin glass that takes a slide-in vinyl sweep. Sterling's frameless doors are listed with 1/4" (6 mm) or 5/16" glass. Measure the edge of your door glass first.

Please read first: IDEAL is not affiliated with Sterling. These are genuine CRL seals, not Sterling parts. They may work on Sterling doors, but they are not specifically designed for Sterling's system. All sales are final and items cannot be returned, so measure your glass and the gap before you order.

Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.

Which Sterling door do you have?

Glass thickness as Sterling and its retailers list it. Doors change over the years, so measure a bare edge of your glass to be sure.

Sterling doorTypeGlass
Vista Pivot II, Standard pivotFramed pivot door1/8" to 1/4": measure
FinesseFrameless sliding door1/4" (6 mm)
Finesse PeakFrameless hinged door5/16"
Other modelsVariesMeasure

Where is your Sterling door leaking?

For hinged and pivot doors. Find the spot, then buy the part for your glass. Every seal pressure fits onto the glass and is cut to length. Not sure where it leaks? Dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops.

Where it leaks1/4" (6 mm) glass5/16" (8 mm) glass
Leaking under the door (bottom of the door)CRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" GlassCRL P956WS $16.80 Bottom Wipe with Drip Rail for 5/16" Glass
Leaking on the hinge side, where the door hangs from the wallCRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" GlassCRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass
Leaking on the latch (strike) side, where the door closes against a wallCRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" GlassCRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass
Leaking where the door closes against a glass panel in a straight line (180°, glass to glass)CRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" GlassCRL P516HJ $18.38 Clear 'H' Jamb, 180°, for 5/16" Glass
CRL PCC8 $16.28 'Y' Jamb with Soft Leg, 180°, for 5/16" Glass
Leaking at a 90° corner, where the door meets a fixed panel at a right angleNo clip-on seal for this glass. Tape-on, any thickness:
CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap
CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
CRL PC0890 $33.58 Clear 'U' with 90° Fin Seal for 5/16" Glass
Leaking in a neo-angle (135°) showerNo clip-on seal for this glass. Tape-on, any thickness:
CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped)
CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap
CRL P045DJ $25.18 135° Neo-Angle Door Jamb Seal for 5/16" Glass
CRL P045SJ $37.78 135° Neo-Angle Strike Jamb Seal for 5/16" Glass
Door won't stay closed (glass door closing against a glass panel)CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass
CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass
CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass
CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass

Each spot has more options and the suggested gap on our replacement seals by leak page. Different glass thickness? See all sizes there.

Framed doors and thin glass

Framed door with a metal frame and a bottom track? Those use thin glass (often 1/8" to 3/16") and take a slide-in vinyl sweep, not a clip-on seal: see our framed door sweeps.

Sterling sliding doors

Sterling sliding doors like Finesse use seals made for Sterling's own sliding hardware, so our clip-on seals mostly won't fit them the same way.

Sterling seals: common questions

Will a CRL seal fit my Sterling shower door?

It depends on the door. Many Sterling doors are framed with thin glass and take a slide-in vinyl sweep, not a clip-on seal. Frameless Sterling doors with 1/4" or 5/16" glass can take the CRL seals on this page. IDEAL isn't affiliated with Sterling and all sales are final, so measure first.

What bottom seal fits a framed Sterling door?

A framed door with a metal bottom rail takes a slide-in vinyl sweep, chosen by the slot and the gap, not by glass thickness. See our framed door sweeps.

What thickness is Sterling shower door glass?

Framed Sterling pivot doors are listed from 1/8" to 1/4". The frameless Finesse slider is 1/4" (6 mm), and Finesse Peak is listed at 5/16". Measure a bare edge to be sure.

Not sure which seal you need?

Use our Seal Finder

Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.

Start the Seal Finder →