Round-Top "Bulb" Bottom Seal & Wipe
Slide-in sweep with a rounded bulb top for framed swing doors.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL M6184 is a 36-inch round-top "bulb" bottom seal & wipe. Made by C.R. Laurence (CRL); available in clear.
Slides into the slot on the bottom of a framed swing door. The rounded "bulb" top holds it in the slot and the 1" clear blade wipes the curb. 36" length, cut to fit.
- Round bulb top
- 1" tall blade
- 36" length, cut to fit
Fit & specs
| Glass thickness | Any |
|---|---|
| Installs by | Slides into the door frame |
| Used for | Framed doors Bottom of the door |
| Height | 1 in. (25 mm) |
| Length | 36 in. (914 mm) |
| Material | Vinyl |
Common questions
How do I install the CRL M6184?
Slide it into the slot in the door's bottom rail from the end.
How do I cut the CRL M6184 to length?
Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.
How long is the M6184?
It comes in a 36" length that you cut to fit your door.
Can I return the M6184?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Bottom 'T' Seal & Wipe, 1"
36" Flat Vinyl Sweep, 1-1/2"
36" "Star Tip" Vinyl Sweep
