Free shipping on every ordersee exceptionsNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
CRL P990WS Bottom Wipe with Drip Rail for 3/8" Glass profile and installed drawing
Most common
CRL · Part P990WSIn stock

Bottom Wipe with Drip Rail for 3/8" Glass

Our most popular bottom sweep. Pressure fits onto the bottom of the door.

$19.43
+ Free shipping
3/8"Glass thickness
7/16"Gap
95"Cut to fit
Pressure fitNo tape needed
Color: Clear
Ships free to your doorFree on this and every order. Usually ships in 3–7 business days.
Cut it to lengthCRL PTS89 Plastic Trim Snips for Cutting SealsClean, straight or angled cuts on vinyl and plastic seals. $88.49
Free shippingOn every order
All sales finalCheck your glass thickness.
Not sure it fits?Try the Seal Finder
OverviewSpecsFAQGuides

About this seal

The CRL P990WS is a 95-inch bottom wipe with drip rail for 3/8-inch glass, with a suggested 7/16" gap. Made by C.R. Laurence (CRL); available in clear, black, white.

Two soft wipes seal against the curb while the 45° drip rail on the outside sheds water back into the shower. Made for frameless swing doors with 3/8" glass. Comes in a 95" length that you cut to the width of your door.

  • Most popular bottom seal for frameless swing doors
  • 45° drip rail turns water back into the shower
  • Suggested gap under the door: 7/16"
  • 95" length, cut to fit

Fit & specs

Glass thickness3/8"
Gap7/16"
Installs byPressure fits onto the glass
Used forBottom of the door
Length95 in. (2413 mm)
MaterialPolycarbonate
Pre-Applied TapeNo

Common questions

What glass thickness does the CRL P990WS fit?

The CRL P990WS fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.

What gap does the P990WS seal?

The suggested gap is 7/16". Measure with the door closed.

How do I install the CRL P990WS?

It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.

How do I cut the CRL P990WS to length?

Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.

How long is the P990WS?

It comes in a 95" length that you cut to fit your door.

What colors does the P990WS come in?

Clear, Black, White.

Can I return the P990WS?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.

Finish the job

You may also need