Gray Glazing Vinyl for 1/4" Glass, 100' Roll
Glazing vinyl for re-glazing framed doors and windows.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL SDV734C is a 100 ft. gray glazing vinyl, 100' roll for 1/4-inch glass. Made by C.R. Laurence (CRL); available in gray.
100% virgin vinyl for repairing or re-glazing framed glass. 3/8" channel depth; fits a 19/64" metal opening. For 1/4" glass. 100-foot roll.
- 100' roll
- For 1/4" glass
- Fits 19/64" x 3/8" channel
Fit & specs
| Glass thickness | 1/4" |
|---|---|
| Installs by | Presses into the channel |
| Used for | Glazing channel |
| Height | 3/8 in. (10 mm) |
| Length | 100 ft. (30 m) |
| Material | Vinyl |
Common questions
What glass thickness does the CRL SDV734C fit?
The CRL SDV734C fits 1/4" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL SDV734C?
Press it into the channel by hand.
How do I cut the CRL SDV734C to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the SDV734C?
It comes in a 100 ft length.
Can I return the SDV734C?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Clear Header Vinyl for 1/4" Glass (per foot)
Clear 1/4" Vinyl Insert for Junior Header Kits
Gray Glazing Vinyl for 7/32"–1/4" Glass, 100' Roll
