Gray Glazing Vinyl for 7/32"–1/4" Glass, 100' Roll
Track vinyl that holds glass in H-bar.
The CRL SDV732C is a 100 ft. gray glazing vinyl for 7/32"–1/4" glass, 100' roll for 1/4-inch glass. Made by C.R. Laurence (CRL); available in gray.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- 100' roll
- Fits S710 H-bar
- Clean finished bead
About this seal
Holds 3/16", 7/32" or 1/4" glass securely in H-bar on sliding track assemblies, leaving a neat finished bead. Fits S710 H-bar. 100-foot roll.
Fit & specs
| Glass thickness | 1/4" |
|---|---|
| Installs by | Presses into the channel |
| Used for | Glazing channel |
| Height | 3/8 in. (10 mm) |
| Length | 100 ft. (30 m) |
| Material | Vinyl |
Common questions
What glass thickness does the CRL SDV732C fit?
The CRL SDV732C fits 1/4" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL SDV732C?
Press it into the channel by hand.
How do I cut the CRL SDV732C to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the SDV732C?
It comes in a 100 ft length.
Can I return the SDV732C?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
