Clear 1/4" Vinyl Insert for Junior Header Kits
Replacement vinyl for HEADER06 junior header kits.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL P281 is a 95-inch clear 1/4" vinyl insert for junior header kits for 1/4-inch glass. Made by C.R. Laurence (CRL); available in clear.
The clear vinyl insert supplied with HEADER06 junior header kits, sold separately for replacement. 95" length.
- For HEADER06 junior header kits
- 95" length
Fit & specs
| Glass thickness | 1/4" |
|---|---|
| Installs by | Presses into the channel |
| Used for | Header (top channel) |
| Length | 95 in. (2413 mm) |
| Material | Vinyl |
Common questions
What glass thickness does the CRL P281 fit?
The CRL P281 fits 1/4" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL P281?
Press it into the channel by hand.
How do I cut the CRL P281 to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P281?
It comes in a 95" length.
Can I return the P281?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Clear Header Vinyl for 1/4" Glass (per foot)
Gray Glazing Vinyl for 7/32"–1/4" Glass, 100' Roll
Gray Glazing Vinyl for 1/4" Glass, 100' Roll
