Clear 'H' Jamb, 180°, for 1/2" Glass
Our most popular straight-line seal. All-rigid and nearly invisible.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL P120HJ is a 95-inch clear 'h' jamb, 180°, for 1/2-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear, black.
Pressure fits onto the edge of the fixed panel with the lip on the latch side, or onto the door with the lip on the hinge side. The lip overlaps the gap so water can't get through where the door closes in a straight line. Entirely rigid polycarbonate for a clean, clear look. For 1/2" glass. 95" length, cut to fit.
- Most popular straight-line (180°) seal
- Clear, low-profile look
- Suggested gap: 3/16"
- 95" length, cut to fit
Fit & specs
| Glass thickness | 1/2" |
|---|---|
| Gap | 3/16" |
| Installs by | Pressure fits onto the glass |
| Used for | Door to fixed glass panel (straight line) Latch (strike) side Hinge or pivot side |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P120HJ fit?
The CRL P120HJ fits 1/2" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P120HJ seal?
The suggested gap is 3/16". Measure with the door closed.
How do I install the CRL P120HJ?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P120HJ to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P120HJ?
It comes in a 95" length that you cut to fit your door.
What colors does the P120HJ come in?
Clear, Black.
Can I return the P120HJ?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Heavy-Duty 'H' Jamb with Vinyl Insert, 180°, for 1/2" Glass
Dual-Durometer Seal & Wipe for 1/2" Glass
Multi-Purpose 'H' Wipe for 1/2" Glass
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
H-Jamb vs. Bulb Seal: Which Shower Door Seal Do You Need?
Both close the gap along the vertical edge of the door.
Read the guide →