Heavy-Duty 'H' Jamb with Vinyl Insert, 180°, for 1/2" Glass
One of the best straight-line seals for stopping leaks. Vinyl insert included.
The CRL P120SDJ is a 95-inch heavy-duty 'h' jamb with vinyl insert, 180°, for 1/2-inch glass, with a suggested 3/16" gap. Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Extra-sturdy, top performer for leaks
- Clear vinyl insert included
- Suggested gap: 3/16"
- 95" length, cut to fit
About this seal
A sturdy polycarbonate jamb that pressure fits onto the fixed panel in line with the door, with a clear vinyl insert for extra coverage. Its stiffness makes it one of the most effective seals for straight-line doors. For 1/2" glass. 95" length, cut to fit.
Fit & specs
| Glass thickness | 1/2" |
|---|---|
| Gap | 3/16" |
| Installs by | Pressure fits onto the glass |
| Used for | Door to fixed glass panel (straight line) Latch (strike) side |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P120SDJ fit?
The CRL P120SDJ fits 1/2" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P120SDJ seal?
The suggested gap is 3/16". Measure with the door closed.
How do I install the CRL P120SDJ?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P120SDJ to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P120SDJ?
It comes in a 95" length that you cut to fit your door.
Can I return the P120SDJ?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
