'Y' Jamb with Soft Leg for 1/4" & 5/16" Glass
Straight-line seal with a soft leg, sized for thinner glass.
The CRL PCC8L is a 95-inch 'y' jamb with soft leg for 1/4-inch and 5/16-inch glass. Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Fits 1/4" and 5/16" glass
- Soft leg for a quiet close
- 95" length, cut to fit
About this seal
A rigid 'U' pressure fits onto the fixed panel and a soft vinyl leg cushions the door as it closes. Fits 1/4" and 5/16" glass. 95" length, cut to fit.
Fit & specs
| Glass thickness | 1/4", 5/16" |
|---|---|
| Installs by | Pressure fits onto the glass |
| Used for | Door to fixed glass panel (straight line) Latch (strike) side |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL PCC8L fit?
The CRL PCC8L fits 1/4" and 5/16" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL PCC8L?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL PCC8L to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the PCC8L?
It comes in a 95" length that you cut to fit your door.
Can I return the PCC8L?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
