Solid quality overall
Solid quality overall. Looks good and functions as expected.

Pivot-side seal: runs up the door edge and the soft lip seals against the wall.

The CRL P14WS is a 95-inch dual-durometer seal & wipe for 1/4-inch glass, with a suggested 1/4" gap. Made by C.R. Laurence (CRL); available in clear.
The industry-standard way to use this seal: pressure fit it up the pivot-side edge of the door and the soft lip seals the gap against the wall. It also works on the bottom of the door as a wipe, or on an overlapping bi-fold door. For 1/4" glass. 95" length, cut to fit.
| Glass thickness | 1/4" |
|---|---|
| Gap | 1/4" |
| Installs by | Pressure fits onto the glass |
| Used for | Hinge or pivot side Door against a wall Bottom of the door Door to fixed glass panel (straight line) |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Solid quality overall. Looks good and functions as expected.
The CRL P14WS fits 1/4" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
The suggested gap is 1/4". Measure with the door closed.
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
It comes in a 95" length that you cut to fit your door.
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
Ships from IDEAL


