Replacement Seals for Kohler Shower Doors
Kohler glass doors are listed with 1/4" (6 mm), 5/16" (8 mm) or 3/8" (10 mm) glass, and one line (Levity) comes in all three. Measure the edge of your door glass, find where it leaks, and buy the genuine CRL seal for that spot.
Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.
Which Kohler door do you have?
Glass thickness as Kohler and its retailers list it. Doors change over the years, so measure a bare edge of your glass to be sure.
| Kohler door | Type | Glass |
|---|---|---|
| Components | Pivot door | 3/8" |
| Finial | Pivot door | 3/8" |
| Revel | Sliding door | 5/16" (8 mm) |
| Levity, Levity Plus | Sliding door | 1/4", 5/16" or 3/8" |
| Composed, Stoneridge | Sliding door | 3/8" |
| Older and other models | Varies | Measure |
Where is your Kohler door leaking?
For hinged and pivot doors. Find the spot, then buy the part for your glass. Every seal pressure fits onto the glass and is cut to length. Not sure where it leaks? Dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops.
| Where it leaks | 1/4" (6 mm) glass | 5/16" (8 mm) glass | 3/8" (10 mm) glass |
|---|---|---|---|
| Leaking under the door (bottom of the door) | CRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" Glass | CRL P956WS $16.80 Bottom Wipe with Drip Rail for 5/16" Glass | CRL P990WS $19.43 Bottom Wipe with Drip Rail for 3/8" Glass |
| Leaking on the hinge side, where the door hangs from the wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass | CRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass |
| Leaking on the latch (strike) side, where the door closes against a wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass | CRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass |
| Leaking where the door closes against a glass panel in a straight line (180°, glass to glass) | CRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" Glass | CRL P516HJ $18.38 Clear 'H' Jamb, 180°, for 5/16" Glass CRL PCC8 $16.28 'Y' Jamb with Soft Leg, 180°, for 5/16" Glass | CRL P380HJ $19.95 Clear 'H' Jamb, 180°, for 3/8" Glass CRL PCC10 $15.75 'Y' Jamb with Soft Leg, 180°, for 3/8" Glass |
| Leaking at a 90° corner, where the door meets a fixed panel at a right angle | No clip-on seal for this glass. Tape-on, any thickness: CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) | CRL PC0890 $33.58 Clear 'U' with 90° Fin Seal for 5/16" Glass | CRL P090SJ $31.48 90° Strike Seal with Vinyl Insert for 3/8" Glass CRL PC1090 $27.28 Clear 'U' with 90° Fin Seal for 3/8" Glass |
| Leaking in a neo-angle (135°) shower | No clip-on seal for this glass. Tape-on, any thickness: CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap | CRL P045DJ $25.18 135° Neo-Angle Door Jamb Seal for 5/16" Glass CRL P045SJ $37.78 135° Neo-Angle Strike Jamb Seal for 5/16" Glass | CRL P135DJ $29.38 135° Neo-Angle Door Jamb Seal for 3/8" Glass CRL P135SJ $35.68 135° Neo-Angle Strike Jamb Seal for 3/8" Glass |
| Door won't stay closed (glass door closing against a glass panel) | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass | CRL PMA10 $50.38 Magnetic Seal, 45° Left-Hand, for 3/8"–1/2" Glass CRL PMB10 $50.38 Magnetic Seal, 45° Right-Hand, for 3/8"–1/2" Glass |
Each spot has more options and the suggested gap on our replacement seals by leak page. Different glass thickness? See all sizes there.
Kohler sliding doors
Kohler sliding doors (Levity, Revel, Composed and similar) use seal kits shaped for Kohler's own sliding hardware, sold by glass thickness. Our clip-on seals are made for hinged and pivot doors, so on a Kohler slider most of them won't fit the same way. The one common exception is where a 3/8" sliding door closes against the wall: CRL PCR10 is made for that spot.
Kohler seals: common questions
Will a CRL seal fit my Kohler shower door?
Often, yes, on Kohler hinged and pivot doors, if you match the glass thickness and the spot where it leaks. Kohler pivot doors like Components and Finial are listed with 3/8" glass, the same glass most CRL seals are made for. But IDEAL isn't affiliated with Kohler, these seals aren't made specifically for Kohler's system, and all sales are final, so measure first.
What thickness is Kohler shower door glass?
It depends on the line: Components and Finial pivot doors are listed with 3/8" glass, Revel with 5/16" (8 mm), and Levity comes in 1/4", 5/16" and 3/8" versions. Measure a bare edge of your glass to be sure.
What bottom seal fits a Kohler pivot door with 3/8" glass?
For 3/8" glass, the CRL P990WS bottom wipe with drip rail pressure fits onto the bottom edge of the door and is cut to length. It's made for about a 7/16" gap between the glass and the curb, so measure the gap first.
Do these seals work on a Kohler Levity or Revel sliding door?
Mostly no. Kohler sliders use seal kits made for their own sliding hardware. The exception is a 3/8" sliding door closing against the wall, where CRL PCR10 is made for that spot.
Use our Seal Finder
Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.