One-Piece Bottom Rail for 1/2" Glass
Ultra-clear one-piece sweep. Pressure fits onto the bottom of the door.
The CRL P661BR is a 95-inch one-piece bottom rail for 1/2-inch glass, with a suggested 7/16" gap. Made by C.R. Laurence (CRL); available in clear, black.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- One-piece design, nothing to come apart
- Ultra-clear finish
- Suggested gap under the door: 7/16"
- 95" length, cut to fit
About this seal
A single-piece bottom rail with a built-in vinyl wipe that hangs down and firmly directs water back into the shower. Because it is one piece, there is no insert to come loose. For 1/2" glass. 95" length, cut to fit.
Fit & specs
| Glass thickness | 1/2" |
|---|---|
| Gap | 7/16" |
| Installs by | Pressure fits onto the glass |
| Used for | Bottom of the door |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P661BR fit?
The CRL P661BR fits 1/2" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P661BR seal?
The suggested gap is 7/16". Measure with the door closed.
How do I install the CRL P661BR?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P661BR to length?
Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.
How long is the P661BR?
It comes in a 95" length that you cut to fit your door.
What colors does the P661BR come in?
Clear, Black.
Can I return the P661BR?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
