Clear Header Vinyl for 3/8" Glass (per foot)
Replacement vinyl for deluxe header kits. Sold by the foot, 100 ft minimum.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL HV380 is a 100 ft. clear header vinyl (per foot) for 3/8-inch glass. Made by C.R. Laurence (CRL); available in clear.
Clear vinyl that holds the glass in a deluxe header. Keep some on hand for repairs. For 3/8" glass. Sold by the foot with a 100-foot minimum.
- For deluxe header kits
- Sold by the foot
- Minimum order: 100 ft
Fit & specs
| Glass thickness | 3/8" |
|---|---|
| Installs by | Presses into the channel |
| Used for | Header (top channel) |
| Length | 100 ft. (30 m) |
| Material | Vinyl |
| Roll Length | 100 |
Common questions
What glass thickness does the CRL HV380 fit?
The CRL HV380 fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL HV380?
Press it into the channel by hand.
How do I cut the CRL HV380 to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the HV380?
It comes in a 100 ft length.
Can I return the HV380?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Flexible Glazing Vinyl for Dry-Glaze U-Channel (3/8" Glass)
Rigid Glazing Vinyl for Dry-Glaze U-Channel (3/8" Glass)
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
