Rigid Glazing Vinyl for Dry-Glaze U-Channel (3/8" Glass)
Replacement outside vinyl for dry-glaze U-channel.
The CRL RV4DUC is a 95-inch rigid glazing vinyl for dry-glaze u-channel for 3/8-inch glass. Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Outside piece of the dry-glaze system
- Holds glass without silicone
- 95" length
About this seal
Fits into the U-channel on the outside of the shower. Pair it with the flexible vinyl (FV4DUC) on the inside. For 3/8" glass. 95" length.
Fit & specs
| Glass thickness | 3/8" |
|---|---|
| Installs by | Presses into the channel |
| Used for | Glazing channel |
| Length | 95 in. (2413 mm) |
| Material | Vinyl |
| Works With | FV4DUC |
Common questions
What glass thickness does the CRL RV4DUC fit?
The CRL RV4DUC fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL RV4DUC?
Press it into the channel by hand.
How do I cut the CRL RV4DUC to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the RV4DUC?
It comes in a 95" length.
Can I return the RV4DUC?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
