Replacement Seals for American Standard Shower Doors
American Standard glass doors are listed with 1/4" (6 mm) or 3/8" glass, and one name (Passage) comes in both. Measure the edge of your door glass, find where it leaks, and buy the genuine CRL seal for that spot.
Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.
Which American Standard door do you have?
Glass thickness as American Standard and its retailers list it. Doors change over the years, so measure a bare edge of your glass to be sure.
| American Standard door | Type | Glass |
|---|---|---|
| Euro | Sliding or pivot door | 1/4" (6 mm) |
| Aspirations | Sliding door | 3/8" |
| Passage | Sliding door | 1/4" or 3/8": measure |
| Prestige and other framed doors | Framed door | Measure |
Where is your American Standard door leaking?
For hinged and pivot doors. Find the spot, then buy the part for your glass. Every seal pressure fits onto the glass and is cut to length. Not sure where it leaks? Dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops.
| Where it leaks | 1/4" (6 mm) glass | 3/8" (10 mm) glass |
|---|---|---|
| Leaking under the door (bottom of the door) | CRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" Glass | CRL P990WS $19.43 Bottom Wipe with Drip Rail for 3/8" Glass |
| Leaking on the hinge side, where the door hangs from the wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass |
| Leaking on the latch (strike) side, where the door closes against a wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P375HW $15.23 Multi-Purpose 'H' Wipe for 3/8" Glass |
| Leaking where the door closes against a glass panel in a straight line (180°, glass to glass) | CRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" Glass | CRL P380HJ $19.95 Clear 'H' Jamb, 180°, for 3/8" Glass CRL PCC10 $15.75 'Y' Jamb with Soft Leg, 180°, for 3/8" Glass |
| Leaking at a 90° corner, where the door meets a fixed panel at a right angle | No clip-on seal for this glass. Tape-on, any thickness: CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) | CRL P090SJ $31.48 90° Strike Seal with Vinyl Insert for 3/8" Glass CRL PC1090 $27.28 Clear 'U' with 90° Fin Seal for 3/8" Glass |
| Leaking in a neo-angle (135°) shower | No clip-on seal for this glass. Tape-on, any thickness: CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap | CRL P135DJ $29.38 135° Neo-Angle Door Jamb Seal for 3/8" Glass CRL P135SJ $35.68 135° Neo-Angle Strike Jamb Seal for 3/8" Glass |
| Door won't stay closed (glass door closing against a glass panel) | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass | CRL PMA10 $50.38 Magnetic Seal, 45° Left-Hand, for 3/8"–1/2" Glass CRL PMB10 $50.38 Magnetic Seal, 45° Right-Hand, for 3/8"–1/2" Glass |
Each spot has more options and the suggested gap on our replacement seals by leak page. Different glass thickness? See all sizes there.
Framed doors and thin glass
Framed door with a metal frame and a bottom track? Those use thin glass (often 1/8" to 3/16") and take a slide-in vinyl sweep, not a clip-on seal: see our framed door sweeps.
American Standard sliding doors
American Standard sliding doors use seals made for their own rollers and track, so our clip-on seals mostly won't fit them the same way. The one common exception is where a 3/8" sliding door closes against the wall: CRL PCR10 is made for that spot.
American Standard seals: common questions
Will a CRL seal fit my American Standard shower door?
On a hinged or pivot door, often yes, if you match the glass thickness and the leak spot. IDEAL isn't affiliated with American Standard, these seals aren't made for its system, and all sales are final, so measure first.
What thickness is American Standard shower door glass?
Euro doors are listed with 1/4" (6 mm) glass and Aspirations with 3/8". Passage is sold in both 1/4" and 3/8" versions, so measure a bare edge to be sure.
Use our Seal Finder
Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.