Dual-Durometer Seal & Wipe for 5/16" Glass
Pivot-side seal: runs up the door edge and the soft lip seals against the wall.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL P770WS is a 95-inch dual-durometer seal & wipe for 5/16-inch glass, with a suggested 1/4" gap. Made by C.R. Laurence (CRL); available in clear.
The industry-standard way to use this seal: pressure fit it up the pivot-side edge of the door and the soft lip seals the gap against the wall. It also works on the bottom of the door as a wipe, or on an overlapping bi-fold door. For 5/16" glass. 95" length, cut to fit.
- Seals the pivot side of the door against the wall
- Also works as a bottom sweep or bi-fold seal
- Rigid clip, soft sealing lip
- Suggested gap: 1/4"
- 95" length, cut to fit
Fit & specs
| Glass thickness | 5/16" |
|---|---|
| Gap | 1/4" |
| Installs by | Pressure fits onto the glass |
| Used for | Hinge or pivot side Door against a wall Bottom of the door Door to fixed glass panel (straight line) |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P770WS fit?
The CRL P770WS fits 5/16" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
What gap does the P770WS seal?
The suggested gap is 1/4". Measure with the door closed.
How do I install the CRL P770WS?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P770WS to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P770WS?
It comes in a 95" length that you cut to fit your door.
Can I return the P770WS?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Multi-Purpose 'H' Wipe for 5/16" Glass
Clear 'H' Jamb, 180°, for 5/16" Glass
'Y' Jamb with Soft Leg, 180°, for 5/16" Glass
