Replacement Seals for MAAX Shower Doors
MAAX lists its glass in millimeters. Most current MAAX doors are 8 mm, which is our 5/16" size, and some older and budget models are 6 mm (1/4"). Measure the edge of your door glass first.
Free shipping to the lower 48 states and DC. On small orders, CRL, the factory that makes these parts, adds its own packing or small-order fee, passed on at cost (see exceptions). All sales are final, so measure your glass first.
Which MAAX door do you have?
Glass thickness as MAAX and its retailers list it. Doors change over the years, so measure a bare edge of your glass to be sure.
| MAAX door | Type | Glass |
|---|---|---|
| Halo | Sliding door | 8 mm (5/16") |
| Uptown | Sliding door | 8 mm (5/16") |
| Aura | Sliding door | 8 mm (5/16") |
| Revelation Round | Sliding door | 6 mm (1/4") |
| Other models | Varies | Measure |
Where is your MAAX door leaking?
For hinged and pivot doors. Find the spot, then buy the part for your glass. Every seal pressure fits onto the glass and is cut to length. Not sure where it leaks? Dry the glass and floor, run the shower for a minute with the door closed and watch for the first drops.
| Where it leaks | 1/4" (6 mm) glass | 5/16" (8 mm) glass |
|---|---|---|
| Leaking under the door (bottom of the door) | CRL P914WS $19.95 Bottom Wipe with Drip Rail for 1/4" Glass | CRL P956WS $16.80 Bottom Wipe with Drip Rail for 5/16" Glass |
| Leaking on the hinge side, where the door hangs from the wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass |
| Leaking on the latch (strike) side, where the door closes against a wall | CRL P250HW $13.13 Multi-Purpose 'H' Wipe for 1/4" Glass | CRL P312HW $25.18 Multi-Purpose 'H' Wipe for 5/16" Glass |
| Leaking where the door closes against a glass panel in a straight line (180°, glass to glass) | CRL P140HJ $14.18 Clear 'H' Jamb, 180°, for 1/4" Glass | CRL P516HJ $18.38 Clear 'H' Jamb, 180°, for 5/16" Glass CRL PCC8 $16.28 'Y' Jamb with Soft Leg, 180°, for 5/16" Glass |
| Leaking at a 90° corner, where the door meets a fixed panel at a right angle | No clip-on seal for this glass. Tape-on, any thickness: CRL SDTL $28.90 / 5-pack Clear Vinyl 'L' Seal, up to 3/8" Gap CRL SDTNL $73.50 / 5-pack Clear Vinyl 'L' Seal, up to 5/16" Gap CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) | CRL PC0890 $33.58 Clear 'U' with 90° Fin Seal for 5/16" Glass |
| Leaking in a neo-angle (135°) shower | No clip-on seal for this glass. Tape-on, any thickness: CRL P12LJT2 $18.90 Clear 'L' Jamb Stop 1/2" x 1/2" (Pre-Taped) CRL SDTS $26.25 / 5-pack Clear Vinyl 'V' Edge Seal, 3/16"–1/4" Gap | CRL P045DJ $25.18 135° Neo-Angle Door Jamb Seal for 5/16" Glass CRL P045SJ $37.78 135° Neo-Angle Strike Jamb Seal for 5/16" Glass |
| Door won't stay closed (glass door closing against a glass panel) | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass | CRL PMA8 $33.58 Magnetic Seal, 45° Left-Hand, for 1/4"–5/16" Glass CRL PMB8 $33.58 Magnetic Seal, 45° Right-Hand, for 1/4"–5/16" Glass |
Each spot has more options and the suggested gap on our replacement seals by leak page. Different glass thickness? See all sizes there.
MAAX sliding doors
Most MAAX glass doors are sliders, which use seals made for MAAX's own rollers and track, so our clip-on seals mostly won't fit them the same way. The table above is for MAAX hinged and pivot doors.
MAAX seals: common questions
Will a CRL seal fit my MAAX shower door?
On a MAAX hinged or pivot door, often yes, if you match the glass and the leak spot: 8 mm glass takes our 5/16" size. 8 mm isn't exactly 5/16", so a seal that grips the glass can fit a little tight. IDEAL isn't affiliated with MAAX and all sales are final, so measure first.
What thickness is MAAX shower door glass?
Halo, Uptown and Aura are listed with 8 mm glass (about 5/16"), and Revelation Round with 6 mm (about 1/4").
Use our Seal Finder
Pick your door, point to where it leaks and we'll show only the seals that fit your glass. Takes about 30 seconds.