Flexible Glazing Vinyl for Dry-Glaze U-Channel (5/16" Glass)
Replacement inside vinyl for dry-glaze U-channel. No messy silicone.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL FV8DUC is a 95-inch flexible glazing vinyl for dry-glaze u-channel for 5/16-inch glass. Made by C.R. Laurence (CRL); available in clear.
Fits into the U-channel on the inside of the shower to hold the glass securely without silicone. Pair it with the rigid vinyl (RV8DUC) on the outside. For 5/16" glass. 95" length.
- Inside piece of the dry-glaze system
- Holds glass without silicone
- 95" length
Fit & specs
| Glass thickness | 5/16" |
|---|---|
| Installs by | Presses into the channel |
| Used for | Glazing channel |
| Length | 95 in. (2413 mm) |
| Material | Vinyl |
| Works With | RV8DUC |
Common questions
What glass thickness does the CRL FV8DUC fit?
The CRL FV8DUC fits 5/16" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL FV8DUC?
Press it into the channel by hand.
How do I cut the CRL FV8DUC to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the FV8DUC?
It comes in a 95" length.
Can I return the FV8DUC?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Clear Header Vinyl for 5/16" Glass (per foot)
Rigid Glazing Vinyl for Dry-Glaze U-Channel (5/16" Glass)
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
