78" Aluminum Jamb with Clear Vinyl Wipe — Brushed Nickel
A 78" aluminum jamb for the edge of a frameless shower door opening, with a clear vinyl wipe to help keep water in.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this wall jamb
The CRL 78" Aluminum Jamb with Clear Vinyl Wipe is a wall jamb for glass showers. Made by C.R. Laurence (CRL) in 2 finishes, including brushed nickel, brite anodized.
This extruded aluminum jamb goes at the edge of the door opening. A clear vinyl wipe is included and gives water resistance when the door is closed. It works on the strike side (where the door closes) with frameless shower door hinges. It can also go on the hinge side when the door uses top and bottom mount pivot hinges. It's 78" (1981 mm) long.
- 78" (1981 mm) long extruded aluminum
- Clear vinyl wipe included for water resistance
- For the strike side of a frameless shower door
- Also for the hinge side with top and bottom pivot hinges
- 15/16" (24 mm) high, 11/16" (17 mm) wide
Specs
| Finishes | 2 |
|---|---|
| Height | 15/16 in. (24 mm) |
| Length | 78 in. (1981 mm) |
| Material | Aluminum |
| Pre-Applied Tape | No |
| Width | 11/16 in. (17 mm) |
Complete the look in Brushed Nickel
Common questions
What finishes does it come in?
Brushed Nickel, Brite Anodized. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
Designer Robe Hook
1-11/16" Wide Sliding Shower Door Bottom Guide (2-Pack)
Through-the-Glass Tissue Paper Roll Holder
95" Replacement L-Shaped Vinyl Seal
Beveled Frameless Shower Door Stop
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →