180 Degree Knob Latch — Polished Chrome
A knob that latches your shower door closed and holds it centered. Works from both sides of the door.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this knob
The CRL 180 Degree Knob Latch is a back-to-back knob for frameless glass shower doors that fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 3 finishes, including polished chrome, brushed nickel, oil rubbed bronze.
This solid brass knob latch gives your door a positive close, which helps a lot when the door hangs slightly out of line. A built-in three-point ball bearing index keeps the knob from free-spinning, and you can turn it from inside or outside the shower. It comes with a tapered strike for doors that close against a wall, and a J-hook for doors that close against another glass panel. It fits glass from 5/16" to 1/2" thick and needs one 7/8" (22 mm) hole through the door.
- Latches the door closed and centers it
- Works from both sides of the door
- Includes a tapered strike (glass-to-wall) and J-hook (glass-to-glass)
- 1-1/4" (32 mm) diameter solid brass knob
- Fits 5/16" to 1/2" (8 to 12 mm) glass, 7/8" (22 mm) hole
Specs
| Finishes | 3 |
|---|---|
| Diameter | 1-1/4 in. (32 mm) |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Glass Mount - Back To Back |
Complete the look in Polished Chrome
Common questions
What glass thickness does the CRL 180 Degree Knob Latch fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many holes does it need?
One. The two knobs bolt together through a single 3/8" or 1/2" (10 or 12 mm) hole in the glass.
Is it one knob or a pair?
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →