Round Thru-Glass Finger Pull — Matte Black
A round pull that fits right through the glass, ideal for sliding shower doors. A center plate keeps water from coming through the hole.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this handle
The CRL Round Thru-Glass Finger Pull is a pull handle for frameless glass shower doors that fits 5/16" to 3/8" glass. Made by C.R. Laurence (CRL) in 4 finishes, including matte black, satin brass, brushed stainless steel.
This stainless steel finger pull fits into a round hole cut through the glass, giving you a neat place to grip the door. A solid center plate closes off the hole so water stays on the shower side. It was designed for the Serenity sliding system but works with other sliders too. It fits 5/16" to 3/8" (8 to 10 mm) tempered glass and needs a 1-7/8" to 2" (46 to 50 mm) diameter hole.
- Pull fits through a round hole in the glass
- Center plate blocks water from coming through the hole
- Stainless steel construction
- Works with Serenity and other sliding doors
- Fits 5/16" to 3/8" (8 to 10 mm) glass with a 1-7/8" to 2" (46 to 50 mm) hole
Specs
| Finishes | 4 |
|---|---|
| Glazing Thickness | 5/16 in. To 3/8 in. (8 mm To 10 mm) |
| Material | Stainless Steel |
| Series | Serenity |
Complete the look in Matte Black
Common questions
What glass thickness does the CRL Round Thru-Glass Finger Pull fit?
5/16" to 3/8" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
What finishes does it come in?
Matte Black, Satin Brass, Brushed Stainless Steel, Polished Stainless Steel. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Junior Contemporary Back-to-Back Knob
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →