Solid Glass UV Bond Knob — Clear
A clear crystal knob that bonds right onto the glass. No holes to drill.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this knob
The CRL Solid Glass UV Bond Knob is a knob for frameless glass shower doors that fits 1/4" to 1/2" glass. Made by C.R. Laurence (CRL) in clear.
This solid glass knob is clear, so it almost disappears on a frameless shower door while still giving you something to grab. Instead of bolting through a hole, it's attached to the glass with UV-cured glass-to-glass adhesive. It's single sided and stands about 1-1/2" off the glass. Besides a door knob, it also works as a robe hook on a shower door. No holes are needed; it bonds directly to 1/4" to 1/2" thick tempered glass with UV adhesive.
- Clear solid glass, nearly invisible on the door
- Single-sided knob, 1-3/16" (30 mm) diameter
- Extends about 1-1/2" (38 mm) from the glass
- Also works as a robe hook on a shower door
- No holes to drill: bonds to 1/4" to 1/2" (6 to 12 mm) tempered glass with UV adhesive
Specs
| Finishes | 1 |
|---|---|
| Diameter | 1-3/16 in. (30 mm) |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Height | 1-7/16 in. (37 mm) |
| Material | Brass |
| Mounting Type | UV Bonded |
Common questions
What glass thickness does the CRL Solid Glass UV Bond Knob fit?
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
Is it one knob or a pair?
One knob, bonded to one side of the glass with UV glass adhesive.
What finishes does it come in?
Clear. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →