Clean looking knob with a solid feel
Clean looking knob with a solid feel. Finish is consistent and it installed easily. Happy with it.

A knob that narrows toward the glass like a bow tie, for an eye-catching touch on a frameless door. Solid brass, with a knob on each side.
The CRL Bow-Tie Back-to-Back Shower Door Knob is a back-to-back knob for frameless glass shower doors that fits 1/4" to 1/2" glass. Made by C.R. Laurence (CRL) in 5 finishes, including polished chrome, brushed nickel, matte black.
The Bow-Tie Style knob tapers in toward the glass and flares out at the end, so it looks distinctive and gives you a sturdy grip. It's made of solid brass and mounts back to back, with a matching knob on the inside and outside of the door. Each knob is 1-1/4" across and stands 1-1/2" off the glass. It works on sliding, folding, swinging and pivot doors in 1/4" to 1/2" tempered glass. You'll need one hole through the glass, 3/8" or 1/2" in diameter.
| Finishes | 5 |
|---|---|
| Design Style | Beveled |
| Diameter | 1-1/4 in. (32 mm) |
| Enclosure Type | Corner, Niche, Bathtub, Tailor Made Solutions |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Height | 1-1/2 in. (38 mm) |
| Material | Brass |
| Mounting Type | Glass Mount - Back To Back |
| Opening Style | Slide, Fold, Swing(side), Pivot(floor) |
Clean looking knob with a solid feel. Finish is consistent and it installed easily. Happy with it.
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
One. The two knobs bolt together through a single 3/8" or 1/2" (10 or 12 mm) hole in the glass.
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
Polished Chrome, Brushed Nickel, Matte Black, Satin Brass, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →