Square Back-to-Back Finger Pull Knob — Polished Chrome
A squared-off finger pull knob for frameless shower doors. A sharp alternative to a standard handle.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this handle
The CRL Square Back-to-Back Finger Pull Knob is a back-to-back pull handle for frameless glass shower doors that fits 1/4" to 1/2" glass. Made by C.R. Laurence (CRL) in 2 finishes, including polished chrome, brushed nickel.
Instead of a full handle, this knob gives you a curved finger pull with crisp square corners on both sides of the door. The square shape pairs nicely with square-edged hinges such as Geneva, Vienna and Cardiff. It's made of brass and mounts back to back, so there's a pull on the inside and the outside. It needs one 1/2" (12 mm) hole in the glass.
- Back-to-back: a finger pull on each side of the door
- Square corners to match square-style hinges
- Brass
- Fits 1/4" to 1/2" (6 to 12 mm) glass
- Needs one 1/2" (12 mm) hole
Specs
| Finishes | 2 |
|---|---|
| Diameter | 3/4 in. (19 mm) |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Height | 1-3/16 in. (30 mm) |
| Material | Brass |
| Mounting Type | Glass Mount - Back To Back |
Complete the look in Polished Chrome
Common questions
What glass thickness does the CRL Square Back-to-Back Finger Pull Knob fit?
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
Is it one pull handle or a pair?
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
What finishes does it come in?
Polished Chrome, Brushed Nickel. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →