Serenity Thru-Glass Pull — Brushed Stainless Steel
The round pull for the Serenity sliding door system. It sits in a hole through the glass, giving you a grip from either side.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this handle
The CRL Serenity Thru-Glass Pull is a pull handle for frameless glass shower doors that fits 3/8" glass. Made by C.R. Laurence (CRL) in 2 finishes, including brushed stainless steel, polished stainless steel.
This is the pull made for the Serenity sliding shower door system, the minimal-hardware slider with the floating, frameless look. It's a stainless steel ring that sits in a hole through the glass, so you can grip it from inside or outside the shower. Use it as a replacement or upgrade on a Serenity door. It requires a 2" diameter hole in 3/8" thick tempered glass.
- Made for the Serenity sliding door system
- Through-the-glass ring pull, usable from both sides
- Durable stainless steel
- For 3/8" (10 mm) tempered glass
- Requires a 2" (51 mm) diameter hole in the glass
Specs
| Finishes | 2 |
|---|---|
| Glazing Thickness | 3/8 in. (10 mm) |
| Series | Serenity |
Common questions
What glass thickness does the CRL Serenity Thru-Glass Pull fit?
3/8" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
What finishes does it come in?
Brushed Stainless Steel, Polished Stainless Steel. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →