Not cheap feeling
Installed the pull handle without any trouble. Feels heavy and well made — not cheap or hollow.

Our most popular towel bar, in a 24" size. A single bar mounts to one side of the glass with decorative metal washers.
The CRL 24" Single-Sided Tubular Towel Bar is a single-sided towel bar for frameless glass shower doors that fits 1/4" to 1/2" glass and mounts 24" center to center. Made by C.R. Laurence (CRL) in 9 finishes, including polished chrome, brushed nickel, matte black.
The BM Series towel bar is bent from heavy-wall 3/4" brass tubing into a clean, simple shape. It mounts on one side of a fixed panel or door, and its slim 3/16" end caps on the back side make it a great choice for sliding bypass doors too. Decorative metal washers sit against the glass and hide small chips around the hole, and plastic washers keep metal from touching glass. Drill two 1/2" (12 mm) holes, 24" (610 mm) apart center to center, in tempered glass 1/4" to 1/2" thick.
| Finishes | 9 |
|---|---|
| Construction | Tubular |
| Diameter | 3/4 in. (19 mm) |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Material | Brass |
| Mounting Center To Center | 24 in. (610 mm) |
| Mounting Type | Glass Mount - Single Sided |
| Series | BM |
| Style Washer Diameter | 1-1/4 in. (32 mm) |
| Style Washers | Yes |
Installed the pull handle without any trouble. Feels heavy and well made — not cheap or hollow.
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
Two holes 24" apart, center to center. If you're replacing a handle, measure the distance between the centers of your existing holes; it has to match.
One towel bar, for one side of the glass only.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Satin Brass, Oil Rubbed Bronze, Brushed Bronze, Satin Nickel, Polished Brass. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →