36" Flat Vinyl Sweep, 1-1/2"
Flat bottom sweep for hinged framed doors.
About this seal
The CRL M6226 is a 36-inch 36" flat vinyl sweep, 1-1/2". Made by C.R. Laurence (CRL); available in clear, gray.
A flat 1-1/2" vinyl seal and wipe for the bottom of hinged framed shower doors. 36" length, cut to fit.
- Flat 1-1/2" vinyl
- Hinged framed doors
- 36" length, cut to fit
Fit & specs
| Glass thickness | Any |
|---|---|
| Installs by | Slides into the door frame |
| Used for | Framed doors Bottom of the door |
| Height | 1-1/2 in. (38 mm) |
| Length | 36 in. (914 mm) |
| Material | Vinyl |
| Width | 1-1/2 in. (38 mm) |
Common questions
How do I install the CRL M6226?
Slide it into the slot in the door's bottom rail from the end.
How do I cut the CRL M6226 to length?
Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.
How long is the M6226?
It comes in a 36" length that you cut to fit your door.
What colors does the M6226 come in?
Clear, Gray.
Can I return the M6226?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Round-Top "Bulb" Bottom Seal & Wipe
Bottom 'T' Seal & Wipe, 1"
36" "Star Tip" Vinyl Sweep
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
How to Replace a Framed Shower Door Sweep
Framed shower doors don't use the clip-on sweeps that frameless glass does.
Read the guide →