Slip-On Handle for Sliding Doors — Brushed Nickel
A simple aluminum handle that slips over the glass edge. No drilling needed, made for 3/16" or 1/4" sliding doors.
About this handle
The CRL Slip-On Handle for Sliding Doors is a pull handle for frameless glass shower doors that fits 3/16" to 1/4" glass. Made by C.R. Laurence (CRL) in 2 finishes, including polished chrome, brushed nickel.
This slip-on handle is a simple way to add a grip to a frameless sliding door without drilling the glass. It fits over the edge of the door and is held in place with silicone. It's aluminum, 2-3/8" tall, and works for new doors or as a replacement on an existing one. It fits glass from 3/16" to 1/4" thick, and no holes or glass work are needed.
- Slips over the glass edge, no holes to drill
- Secured with silicone, no other parts
- 2-3/8" (60 mm) tall aluminum
- Great for new doors or replacements
- Fits 3/16" to 1/4" (5 to 6 mm) tempered glass
Specs
| Finishes | 2 |
|---|---|
| Glazing Thickness | 3/16 in. To 1/4 in. (5 mm To 6 mm) |
| Height | 2-3/8 in. (60 mm) |
| Material | Aluminum |
Complete the look in Brushed Nickel
Common questions
What glass thickness does the CRL Slip-On Handle for Sliding Doors fit?
3/16" to 1/4" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
What finishes does it come in?
Polished Chrome, Brushed Nickel. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →