Single-Sided Cylinder Knob with Plastic Sleeve — Brushed Nickel
A simple, sleek cylinder knob with a protective plastic sleeve. A great fit for sliding bypass shower doors.
About this knob
The CRL Single-Sided Cylinder Knob with Plastic Sleeve is a back-to-back knob for frameless glass shower doors that fits 1/4" to 1/2" glass. Made by C.R. Laurence (CRL) in 3 finishes, including polished chrome, brushed nickel, oil rubbed bronze.
This cylinder knob adds a quiet, simple touch to a glass shower door without taking away from the all-glass look. A plastic sleeve slips over the knob to protect its finish, which makes it ideal for sliding bypass doors. The knob is solid brass, 3/4" across, and stands 1-1/4" off the glass, while the end cap on the other side sits only 5/32" from the glass. It fits 1/4" to 1/2" thick tempered glass and needs a 3/8" or 1/2" (10 or 12 mm) hole.
- Single-sided knob with a low 5/32" (4 mm) end cap on the back side
- Plastic sleeve protects the knob, ideal for sliding bypass doors
- 3/4" (19 mm) diameter, stands 1-1/4" (32 mm) from the glass
- Solid brass construction
- Fits 1/4" to 1/2" (6 to 12 mm) glass; needs a 3/8" or 1/2" (10 or 12 mm) hole
Specs
| Finishes | 3 |
|---|---|
| Diameter | 3/4 in. (19 mm) |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Height | 1-1/4 in. (32 mm) |
| Material | Brass |
| Mounting Type | Glass Mount - Back To Back |
Complete the look in Brushed Nickel
Common questions
What glass thickness does the CRL Single-Sided Cylinder Knob with Plastic Sleeve fit?
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many holes does it need?
One. The two knobs bolt together through a single 3/8" or 1/2" (10 or 12 mm) hole in the glass.
Is it one knob or a pair?
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →